Cart
Structural Bonding
Properly applied structural adhesive is a lightweight solution for adding strength and durability to electric vehicle (EV) battery packs.
Proper Adhesive Application for Strong and Light Battery Packs
Using adhesives for structural bonding methods help make a battery lightweight, while adding strength and rigidity. Typically, a one or two component epoxy is dispensed in a bead shape to bond two pieces of a battery pack together.
Precision and accuracy are important to proper bonding and efficient material use. Metering systems with strong material control and robust equipment to handle highly abrasive, medium to viscosity material is recommended.
Discover Solutions for Structural Bonding
These products are a representation of a possible needs for a finished system. Your solution is configured for your specific needs.
Supply
Dispensing Systems
Dispense Valves
Related Articles
EV Battery Design Process to Production: Questions and Answers
Subtle design problems often derail production as electric vehicle (EV) battery manufacturers race to meet market demands. Graco’s eMobility strategist answers questions about ways to keep that process on track.
Automotive Structural Adhesives Application
Accurate bead placement is critical for a properly bonded system. Learn more about how E-Flo iQ delivers sustained in-plant performance, lowers maintenance costs, and drastically reduces system complexity for structural adhesive application.
Related Materials
Parker LORD Sipiol UV
Sipiol UV was developed specifically for electric vehicle (EV) battery applications. It cures in seconds with UV light, and is electrically insulative.
PPG CoraChar SE 4000
PPG CoraChar SE 4000 intumescent fire protective coating shields electric vehicle (EV) battery packs and electrical energy components from external fires and internal thermal runaway events.
Sika Sikagard-834
Sikagard 834 epoxy-based intumescent fire protection coating protects electric vehicle (EV) batteries from thermal events.
Tflex CR607
At 6.4 W/m-K thermal conductivity, Tflex™ CR607 is at the forefront of thermal performance for a two-part, cure in place dispensable gap filler.
VM 1802
LG Chem VM 1802, a two-component thermal material for EV Battery and Electronics heat transfer applications.
Liqui-Form 3500 (LF3500)
Henkel - BERGQUIST® LIQUI-FORM 3500 is a high conductivity gel thermal interface material designed for demanding applications that require a balance between dispensability and low component stress during assembly.
HB Fuller EV Protect 4006
EV Protect 4006 is a two-component flame retardant, low-density polyurethane foam designed for potting and encapsulation of cylindrical cells in EV battery modules.
HB Fuller EV Seal 500
Learn more about EV SEAL 500, an easy to apply, fast setting, and resealable gasket material used in automotive and EV battery applications.
LORD CoolTherm SC-1200
Since CoolTherm® SC 1200 thermally conductive silicone gap filler is highly abrasive, Parker LORD® asked Graco to find out how to dispense one million shots of the two component material without equipment failure.
LORD CoolTherm TC-2002
Parker Lord CoolTherm® TC-2002 adhesive is a two-component adhesive system designed for use in structural bonding applications which require thermal conductivity with high bond strength.
Dow SYLGARD 170
SYLGARD™ 170 Fast Cure Silicone Elastomer is a two-part general purpose encapsulant with low viscosity, good flow ability, and flame resistance that cures fast at room temperature.
Dow Dowsil EF-6525 RTV Low-Viscosity Silicone Foam
DOWSIL™ EF-6525 RTV Low Viscosity Silicone Foam is a two-component low-density liquid elastomer that cures into a foamed elastomer.
