PPG CoraChar SE 4000

Product Description

PPG CoraChar SE 4000 is an epoxy intumescent fire protective coating for electric vehicle (EV) battery packs and electrical energy components. The two-component (2K) material protects the battery substrate against external fires and internal thermal runaway events.

Product Features

• Two-component liquid coating
• Intumescent
• 100 percent solids
• Solvent-free
• Lightweight

Properties

The fireproofing material has these qualities:

• Base: Epoxy two-component
• Color: Matte gray
• Dry density: 1.4g/cm3 (87.4 .b/ft3)
• Solids: 100 percent
• VOC (volatile organic compound - supplied):
  • Directive 1999/13/EC, SED: max. 0.0 g/kg
  • EUR Directive: 2004/42/IIA(i)(500) 0 g/l

Epoxy Intumescent Material Notes

• Material should be stored in dry conditions, out of direct sunlight and at temperatures above 0°C (32°F) and below 23°C (73°F).
• Short time storage (transport): 10 days -20°C to 45°C in its original package.
• Dry film thickness depends on the fire protection requirements. Consult PPG for more information.
• The applied mass density is dependent upon many variables such as application method and type of equipment used, environmental and curing temperatures, test methods employed, etc.
• The expected variation is normally within a ±10% range.
• Apply appropriate loss/wastage factor.

Recommended Uses

• EV battery
• Electrical energy components

For complete product information, please refer to ppg.com.
 

Solution for Applying PPG CoraChar SE 4000

Only Graco offers a complete dispensing solution for advanced fireproofing materials like PPG CoraChar SE 4000 Series. Designed to apply two-component (2K) component intumescent fire protective coatings in EV battery packs and electrical components, Graco’s fully automated system provides a thorough and effective coating ideal for high-volume production.