Cart
G-Mini Pumps
Make the most of your space, budget and machines. The full-featured G-Mini® offers reliable lubrication in a small footprint to fit more types of machines. Use it to simplify everyday maintenance, extend lifecycles and optimize uptime.
PERFECT FIT FOR NON-STOP PRODUCTIVITY
- Designed specifically to fit almost anywhere, even on small machines and applications with fewer lubrication points.
- Provides reliable, consistent machinery lubrication to critical parts automatically
- Automatic grease lubrication systems can reduce maintenance, improve uptime and extend the lifecycles of your machines.
Follower Plate & Stir Paddle
- This unique combination combats oil separation while ensuring the pump element “loading chamber” is always full.
Patent-Pending Heater
- Pump grease down to -40º C/F when ordered with the heater option.
Two Control Options
- No Controller: pair with either an external controller or PLC.
- Controller: Easy-to-program controller can be utilized for both time based and cycle based systems and provides low level alert and alarm.
M12 Input
- M12 cycle or proximity switch input standard on all pumps with a controller.
5-Wire CPC Power Cable
- Multifunction cable supplies power to the pump, pairs with a remote manual run button, and provides low level or cycle fault output.
G-Series Pump Comparison Guide
Browse G-Mini Pumps
Documents & Videos
NAME
Language
Size
File Type
Download
6.1 MB
PDF
NAME
Language
Size
File Type
Download
3.8 MB
PDF
English
135.7 kB
PDF
Graco G-Series Pump Comparison Guide
G-Mini Pump |
G1 Pump |
G3 Pump | |
|---|---|---|---|
| Reservoir | 0.5 and 1 L Include stir paddle and follower plate | 2, 4 and 8 L Include stir paddle; follower plate available | 2, 4, 8, 12, 16 and 20 L Include stir paddle; follower plate available |
| Fluids | Grease up to NLGI #2 | Oil, Grease up to NLGI #2 | Oil, Grease up to NLGI #2 |
| Power Source | 12 VDC or 24 VDC | 90-230 VAC, 12 VDC or 24 VDC | 90-230 VAC, 12 VDC or 24 VDC |
| Control | Standard and Controller | Standard and Plus | Standard, Pro, SP, Max |
| Control Features | One controller with 2 options:
Cycle-Based:
| Plus controller:
| Pro and Max controllers:
*Max controller only SP controller:
|
| Power Cord | CPC; sold separately | DIN or CPC; sold separately | DIN or CPC; included |
| Pump Element | 2 maximum; 1 factory-installed | 1 maximum; 1 factory-installed | 3 maximum; 1 factory-installed |
| Output Per Pump | 0.18 in3 (3 cm3 ) / min | 0.25 in3 (4 cm3 ) / min | 0.25 in3 (4 cm3 ) / min |
| Maximum Working Pressure | 4,100 psi (28 MPa, 280 bar) | 5,100 psi (35 MPa, 352 bar) | 5,100 psi (35 MPa, 352 bar) |
| Metering Device | Series Progressive | Series Progressive | Series Progressive or Single Line Parallel (with addition of a G3 Vent Valve) |
| Monitoring | Controller can monitor 1 zone for cycles | None | SP controller can monitor 1 sensor for cycles; Max controller can monitor up to 3 independent sensors for cycles or pressure |
| Proximity or Cycle Switch Type | PNP | Pump has no cycle input | PNP or NPN |
| Electric Motor | Inline gear box | Load minimizing drive with offset cam design | Load minimizing drive with offset cam design |
| Accessories | Uses most G3 accessories including pressure relief, power cables, high flow fill stud, 5-gallon fill pump | Uses most G3 accessories including pressure relief, power cables, high-flow fill stud, 5-gallon fill pump | See G3 Accessories in ILE Buyer’s Guide |
