Cart
Bondway 8868
Thermally Conductive Adhesive Polyurethane | Bondway
Bondway 8868 Thermal Interface Material
Bondway® 8868 is a thermally conductive adhesive polyurethane refined from polyether-modified polymer alloy. The two-component thermal interface material (TIM) brings high bonding strength and good thermal conductivity to battery and electronic components.
Product Characteristics
| Part A | Part B | ||
| Color | Black | White | |
| Gray (combined) | |||
| Viscosity | 6000 - 20000 cps | 5000 - 50000 cps | |
| 10000-50000 cps (combined) | |||
| Thixotropy Index | 2 - 5 | 3 - 6 | |
| Density | 2.40 - 2.60 g/cm³ | 2.50 - 2.70 g/cm³ | |
| 2.45 - 2.65 g/cm³ (combined) | |||
| Mix Ratio | By volume | 100 | 100 |
| By weight | 100 | 105 | |
| Open Time | ≥30 min | ||
| Thermal Conductivity | ≥1.5 W/ (m.k) | ||
| Hardness | 50 - 70 Shore D | ||
| Applicable Temperature Range | -40 to 85˚C | ||
Recommended Uses
Bondway 8868 two-component thermal interface material can be used for bonding, fixing, and heat dissipation of heat-generating electronic components.
For more information about Bondway material, refer to bondwaycn.com.
Solutions for Applying Bondway 8868 Thermally Conductive Adhesive
Dispensing solutions for Bondway 8868 thermally conductive adhesive polyurethane must withstand the highly filled and abrasive material. That is why Graco provides a complete system with Elite construction to meet Bondway 8868 application requirements*.
- Supply Pumps: Check-Mate supply pumps provide advanced durability and reliability for transferring material.
- Meter Mix and Dispense System: Graco’s Hydraulic Fixed Ratio (HFR) system delivers unmatched durability, performance for two-component materials.
- Dispense Valves: MD2 valves with Elite construction have been proven to dispense nearly 3,000 liters (more than 2 million cycles) of TIM blend with no failures detected.**
* Additional Elite construction system configurations are available depending on application and performance requirements.
**Results may vary. Variables affecting component life include, but are not limited to, material chemistry/fillers, flow rate, cycle rate, maintenance diligence, and system pressure.
Elite Construction Withstands Bondway 8868
Graco tested how Check-Mate supply pumps and HFR system with Elite construction performed while mixing, metering and dispensing Bondway 8868 thermally conductive adhesive polyurethane.
The equipment with Elite construction dispensed at least 50,000 gallons (200,000 liters) before any wear on pump pistons and cylinders was noticed.
All trademarks and registered trademarks are the property of their respective owners.
Contact an Expert
Graco provides complete, end-to-end system solutions for applying Bondway 8868 and other thermal interface materials. Contact our experts about how we can configure a system to meet your application requirements.
Recommended Products
Related Articles
Extreme Material Abrasiveness? Problem Solved with Elite
Some thermal interface materials (TIMs) are so abrasive, it’s like pumping diamond dust or liquid sandpaper. Explore why and how we developed Elite™, the longest-lasting pump construction for abrasive material dispense.
Thermal Management for EV Battery and Electronics Manufacturing
Whether it’s assembling electric vehicle (EV) batteries and electronic products, or miniaturizing printed circuit boards (PCBs), thermal management remains crucial to longevity, efficiency and safety.
Controlling Excess Heat
Proper heat dissipation keeps electronic components running optimally.
