Cart
ProMix PD2K
ProMix PD2K Manual Proportioner, Dual Panel, High Pressure, 70 cc Resin Pump, 35 cc Catalyst Pump, 2 Solvent Valves
Part Number: MC2002
Image is for illustrative purposes only.
ProMix PD2K
ProMix PD2K Manual Proportioner, Dual Panel, High Pressure, 70 cc Resin Pump, 35 cc Catalyst Pump, 2 Solvent Valves
Part Number: MC2002
100% Positive Displacement Technology for accurate mix ratios and consistent performance. Great for short pot life materials, the ProMix PD mixes the material close to the gun so the flush zone is significantly smaller. This allows for faster color changes, less material usage and disposal costs ov...
More Info
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
100% Positive Displacement Technology for accurate mix ratios and consistent performance. Great for short pot life materials, the ProMix PD mixes the material close to the gun so the flush zone is significantly smaller. This allows for faster color changes, less material usage and disposal costs overall.
- Up to 80% reduction in flushing waste over the most efficient traditional proportioning systems
- Faster color changes and less material to flush mean less waste and less downtime
- Stalls under pressure for consistent, on-ratio results (within 1% accuracy)
- Proportion both epoxy and urethane with ONE system
- Field serviceable in less than 20 minutes - no need for costly factory rebuilds like gear pumps
Specifications & Documents
Technical Specifications
Convert to Metric| Air Inlet Size (in) | 3/8 |
|---|---|
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Applicator Type | Manual |
| Component Type | Two Component |
| Construction | Stainless Steel, Tungsten Carbide, Perfluoroelastomer, PTFE, PPS, UHMWPE |
| Flush Type | Solvent |
| Frequency (Hz) | 50/60 |
| Gun Activation | Manual |
| Material Type | Plural Component |
| Maximum Mix Ratio | 50:1 |
| Maximum Number of Colors | Up to 16 |
| Maximum Working Pressure (MPa) | 0.7 |
| Maximum Working Pressure (psi) | 100 |
| Measuring Type | Meter |
| Minimum Mix Ratio | 0.1:1 |
| Mix Accuracy (%) | 1 |
| Model | ProMix |
| Number of Catalysts | Up to 4 |
| Number of Color Valves | N/A |
| Number of Resin Colors | Up to 30 |
| Power Source | Electric |
| Pressure Type | High Pressure |
| Proportioner Type | Manual |
| Proportioning Type | Manual Electronic |
| Series | PD2K |
| Type | Proportioning System |
| Air Inlet Size (cm) | 0.9525 |
| Air Inlet Size (in) | 3/8 |
| Air Inlet Size (mm) | 9.525 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Applicator Type | Manual |
| Component Type | Two Component |
| Construction | Stainless Steel, Tungsten Carbide, Perfluoroelastomer, PTFE, PPS, UHMWPE |
| Flush Type | Solvent |
| Frequency (Hz) | 50/60 |
| Gun Activation | Manual |
| Material Type | Plural Component |
| Maximum Mix Ratio | 50:1 |
| Maximum Number of Colors | Up to 16 |
| Maximum Working Pressure (MPa) | 0.7 |
| Maximum Working Pressure (bar) | 7 |
| Maximum Working Pressure (kPa) | 700 |
| Maximum Working Pressure (psi) | 100 |
| Measuring Type | Meter |
| Minimum Mix Ratio | 0.1:1 |
| Mix Accuracy (%) | 1 |
| Model | ProMix |
| Number of Catalysts | Up to 4 |
| Number of Color Valves | N/A |
| Number of Resin Colors | Up to 30 |
| Power Source | Electric |
| Pressure Type | High Pressure |
| Proportioner Type | Manual |
| Proportioning Type | Manual Electronic |
| Series | PD2K |
| Type | Proportioning System |
Product Manuals
3A3180A, ProMix PD2K Modbus TCP Installation Kit, Instructions - Parts, English
(766 KB)
(English Only)
407072B, Electrostatic Air Hose Quick Disconnect Kit, Instructions/Parts, English
(608 KB)
(English Only)
Sales Literature
Certifications
MSD201EN, Loctite 567 Low Strength Thread Sealant, Safety Data Sheet, English
(141 KB)
(English Only)
