Cart
SaniForce 1040 FG
SaniForce 1040, 1" FG SST Pneumatic Diaphragm Pump, SS Center, SS Seats, PT Balls, PO Diaphragms
Part Number: FD1113
SaniForce 1040 FG
SaniForce 1040, 1" FG SST Pneumatic Diaphragm Pump, SS Center, SS Seats, PT Balls, PO Diaphragms
Part Number: FD1113
Graco's SaniForce 1040, 1-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 41 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
Graco's SaniForce 1040, 1-inch air-operated double diaphragm (AODD) pump provides a hygienic solution for customers needing to pump flow rates up to 41 gpm. It offers a quick knock-down design for easy cleaning and a low cost of ownership.
Ideal for food processing and personal care markets. Common applications include high volume evacuation of liquid concentrates from holding vessels or repackaging of fluids from the original container to smaller receptacles. Suitable to pump products like flavorings, purees, sauces and other low to medium viscosity materials.
- 1 inch sanitary pump with flow rates up to 41 gpm (155 lpm) and pressures up to 120 psi (8 bar)
- Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
- Graco double diaphragm pumps stall under pressure preventing pump failures from clogged lines or closed valves
- Externally serviceable air valves deliver leading efficiency and reduce downtime.
- Equipped with inlet and outlet tri-clamp connections, offering a quick knockdown design for easy cleanability and a swift maintenance process
- PTFE/EPDM overmolded diaphragm design reduces areas that harbor bacteria while improving wear and diaphragm life with no exposed diaphragm plate on the fluid side
- 316 stainless steel wetted section
- All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21
- Pass solids up to 0.125 in. (3.2 mm)
Specifications & Documents
Technical Specifications
Convert to Metric| Air Exhaust Port Size (in) | 3/4 |
|---|---|
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Sanitary |
| Ball Material | PTFE |
| Center Section Material | Stainless Steel |
| Compatible Material | Edible Oil, Food and Personal Care |
| Compressor Required | Yes |
| Configuration Code | 1040FG-PS01AS13SSPTPOPT21 |
| Connection Type | Tri-Clamp |
| Diaphragm Material | PTFE/EPDM Overmold |
| Fluid Passage Size (cm) | 2.54 |
| Fluid Passage Size (in) | 1 |
| Fluid Passage Size (mm) | 25.4 |
| Fluid Section Material | 316 Stainless Steel |
| For Use With | Food and Personal Care |
| Hazardous Location Approval | ATEX, IECEx |
| Manifold Configuration | End Port |
| Manifold O-Ring Material | PTFE |
| Material | Stainless Steel |
| Material Certification | EN 1024:2004 Type 2.1 (Standard) |
| Maximum Air Consumption (SCFM) | 50 |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 256 |
| Maximum Flow Rate (GPM) | 41 |
| Maximum Fluid Operating Temperature (°C) | 82 |
| Maximum Fluid Operating Temperature (°F) | 180 |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (in) | 0.125 |
| Minimum Fluid Operating Temperature (°C) | -40 |
| Minimum Fluid Operating Temperature (°F) | -40 |
| Model | SaniForce |
| Overall Height (in) | 16.1 |
| Power Source | Pneumatic |
| Pump Ratio | 1:1 |
| Pump Type | FDA Grade |
| Seat Material | 316 Stainless Steel |
| Series | 1040 FG |
| Standards Met | FDA Compliant Materials, EC 1935/2004 |
| Surface Finish | 125 Ra |
| Tri-Clamp Connection Size | 1.5-inch |
| Type | Pneumatic Diaphragm Pump |
| Weight (lb) | 55 |
| Air Exhaust Port Size (in) | 3/4 |
| Air Exhaust Port Thread Gender | Female |
| Air Exhaust Port Thread Type | NPT |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Sanitary |
| Ball Material | PTFE |
| Center Section Material | Stainless Steel |
| Compatible Material | Edible Oil, Food and Personal Care |
| Compressor Required | Yes |
| Configuration Code | 1040FG-PS01AS13SSPTPOPT21 |
| Connection Type | Tri-Clamp |
| Diaphragm Material | PTFE/EPDM Overmold |
| Fluid Passage Size (cm) | 2.54 |
| Fluid Passage Size (in) | 1 |
| Fluid Passage Size (mm) | 25.4 |
| Fluid Section Material | 316 Stainless Steel |
| For Use With | Food and Personal Care |
| Hazardous Location Approval | ATEX, IECEx |
| Manifold Configuration | End Port |
| Manifold O-Ring Material | PTFE |
| Material | Stainless Steel |
| Material Certification | EN 1024:2004 Type 2.1 (Standard) |
| Maximum Air Pressure (MPa) | 0.8 |
| Maximum Air Pressure (bar) | 8 |
| Maximum Air Pressure (kPa) | 800 |
| Maximum Air Pressure (psi) | 120 |
| Maximum Cycle Rate (CPM) | 256 |
| Maximum Flow Rate (L/min) | 155 |
| Maximum Fluid Operating Temperature (°C) | 82 |
| Maximum Fluid Operating Temperature (°F) | 180 |
| Maximum Fluid Pressure (MPa) | 0.8 |
| Maximum Fluid Pressure (bar) | 8 |
| Maximum Fluid Pressure (kPa) | 800 |
| Maximum Fluid Pressure (psi) | 120 |
| Maximum Solid Size (cm) | 0.32 |
| Maximum Solid Size (mm) | 3.2 |
| Minimum Fluid Operating Temperature (°C) | -40 |
| Minimum Fluid Operating Temperature (°F) | -40 |
| Model | SaniForce |
| Power Source | Pneumatic |
| Pump Ratio | 1:1 |
| Pump Type | FDA Grade |
| Seat Material | 316 Stainless Steel |
| Series | 1040 FG |
| Standards Met | FDA Compliant Materials, EC 1935/2004 |
| Surface Finish | 125 Ra |
| Tri-Clamp Connection Size | 1.5-inch |
| Type | Pneumatic Diaphragm Pump |
