UniXact C300
UniXact C300 Dispensing Cell
Part Number: C300
UniXact C300
UniXact C300 Dispensing Cell
Part Number: C300
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product BrochureDispense Designer Software:
Easy programming through vision programming, DXF upload, teach pendant, or touch screen.
Off-line programming
Vision Programming – easily locate and prepare dispense points using crosshair camera
- Motion Table:
Heavy payload available for heavy valves
Programmable Z axis
3D contouring
Real-time process monitoring and data storage
Easy maintenance - Programming Methods:
Vision crosshairs, DXF Upload, Intuitive icon based touch screen, Teach pendant - Add-on Options:
Customizable load/unload Y-slides or conveyor
Vision programming and vision skew
Laser height sensing
Part in place sensor
Needle calibration
Needle Blowoff
Door or light curtain - Ideal for processing:
Abrasive or highly filled media
Adhesives
Silicones
Silver Epoxies
UV Cure Adhesives
Oils/greases
Fluxes
Hot melt / PUR
Specifications & Documents
Technical Specifications
Convert to MetricAccuracy (+/- in) | 0.004, 12 |
---|---|
Add on Table Options | Part in Place Sensor, Needle Calibration, Needle Blowoff, Door Curtain, Light Curtain, Customizable Load/Unload - Y Slides, Vision Programming and Vision Skew, Laser Height Sensing |
Dispense Speed (in/s) | 4 |
Drive Method | Ball Screw Drives with Linear Guide Bearings |
Interface | Touch Screen/Graco Proprietary Software Supported By Windows 10 |
Model | UniXact |
Off-Line Programming | Able to program at central location & Send to worldwide sites |
Overall Depth (in) | 41 |
Overall Height (in) | 75 |
Overall Width (in) | 37 |
Point to Point Speed (in/s) | 8 |
Position Repeatability (in) | 0.0004 |
Program Storage | 20 Programs on Board, 1,000+ in PC |
Programming Methods | Vision Crosshairs, DXF Upload, Intuitive Icon Based Touch Screen, Teach Pendant |
Series | C300 |
Type | Dispensing System |
Work Envelope X (in) | 10 |
Work Envelope Y (in) | 11 |
Work Envelope Z (in) | 2.75 |
Accuracy (+/- in) | 0.004, 12 |
Accuracy (+/- mm) | 0.1, 300 |
Add on Table Options | Part in Place Sensor, Needle Calibration, Needle Blowoff, Door Curtain, Light Curtain, Customizable Load/Unload - Y Slides, Vision Programming and Vision Skew, Laser Height Sensing |
Dispense Speed (mm/s) | 100 |
Drive Method | Ball Screw Drives with Linear Guide Bearings |
Interface | Touch Screen/Graco Proprietary Software Supported By Windows 10 |
Model | UniXact |
Off-Line Programming | Able to program at central location & Send to worldwide sites |
Overall Depth (cm) | 104.1 |
Overall Depth (mm) | 1041 |
Overall Height (cm) | 190.5 |
Overall Height (mm) | 1905 |
Overall Width (cm) | 94 |
Overall Width (mm) | 940 |
Point to Point Speed (mm/s) | 200 |
Position Repeatability (mm) | 0.01 |
Program Storage | 20 Programs on Board, 1,000+ in PC |
Programming Methods | Vision Crosshairs, DXF Upload, Intuitive Icon Based Touch Screen, Teach Pendant |
Series | C300 |
Type | Dispensing System |
Work Envelope X (mm) | 254 |
Work Envelope Y (mm) | 277 |
Work Envelope Z (mm) | 70 |