Cart
Wolverine Advanced
Wolverine® Advanced Duplex Chemical Injection Pump, 230/460 VAC 3-Phase Motor, 5/8 in Plunger, FKM-ETP Seals
Part Number: A26740
Wolverine Advanced
Wolverine® Advanced Duplex Chemical Injection Pump, 230/460 VAC 3-Phase Motor, 5/8 in Plunger, FKM-ETP Seals
Part Number: A26740
Wolverine chemical injection pumps are designed for injecting chemicals at well sites and pipelines to protect from corrosion, plugging, and freezing.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
Wolverine chemical injection pumps are designed for injecting chemicals at well sites and pipelines to protect from corrosion, plugging, and freezing.
- Wolverine pumps reduce emissions to the atmosphere and have a greater level of control when used with our injection rate controllers.
- Our injection pumps are designed for years of operation before simple repairs.
- Each pump features an adjustable fluid packing that can last up to 25 times longer than non-adjustable seals.
- Designed to operate in environments from -40° F to 175°F (-40°C to 79°C). They have 316 SST wetted parts, plus they’re sealed against water and dust.
- Flow rates up to 430 gpd (1,628 lpd) and a pressure rating up to 10,000 psi (686 bar, 68.9 MPa).
- Long-lasting seals can easily be replaced in less than ten minutes, on location.
- Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates.
- HNBR, FKN, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals.
- Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system.
Specifications & Documents
Technical Specifications
Convert to Metric| Compatible Material | Corrosion Inhibitors, Methanol, Scavengers |
|---|---|
| Fluid Inlet Size (in) | 1/4 |
| Fluid Outlet Size (in) | 1/4 |
| Input Voltage (V ac) | 230 |
| Material | Stainless Steel |
| Maximum Flow Rate (GPD) | 218 |
| Maximum Input Amperage (A) | 0.59 |
| Maximum Working Pressure (MPa) | 6.2 |
| Maximum Working Pressure (psi) | 900 |
| Model | Wolverine |
| Motor Type | Ordinary Location |
| Number of Fluid Heads | 2 |
| Plunger Rod Coating | Chromex |
| Plunger Size (in) | 5/8 |
| Power Rating (HP) | 0.2 |
| Seal Material | FKM-ETP |
| Series | Advanced |
| Type | Electric Chemical Pump |
| Voltage | 230/460 VAC |
| Voltage (V ac) | 230/460 |
| Compatible Material | Corrosion Inhibitors, Methanol, Scavengers |
| Fluid Inlet Size (cm) | 0.635 |
| Fluid Inlet Size (in) | 1/4 |
| Fluid Inlet Size (mm) | 6.35 |
| Fluid Outlet Size (cm) | 0.635 |
| Fluid Outlet Size (in) | 1/4 |
| Fluid Outlet Size (mm) | 6.35 |
| Input Voltage (V ac) | 230 |
| Material | Stainless Steel |
| Maximum Input Amperage (A) | 0.59 |
| Maximum Working Pressure (MPa) | 6.2 |
| Maximum Working Pressure (bar) | 62 |
| Maximum Working Pressure (kPa) | 6200 |
| Maximum Working Pressure (psi) | 900 |
| Model | Wolverine |
| Motor Type | Ordinary Location |
| Number of Fluid Heads | 2 |
| Plunger Rod Coating | Chromex |
| Seal Material | FKM-ETP |
| Series | Advanced |
| Type | Electric Chemical Pump |
| Voltage | 230/460 VAC |
| Voltage (V ac) | 230/460 |
Product Manuals
Sales Literature
Certifications
MSD201EN, Loctite 567 Low Strength Thread Sealant, Safety Data Sheet, English
(141 KB)
(English Only)
