Cart
Python XL-DA25
Python® XL-DA25 Pneumatic Chemical Injection Pump, 7-1/2 in Air Motor, 1 in Chromex Coated Plunger, FFKM Seals, ATEX Approved
Part Number: A24713
Python XL-DA25
Python® XL-DA25 Pneumatic Chemical Injection Pump, 7-1/2 in Air Motor, 1 in Chromex Coated Plunger, FFKM Seals, ATEX Approved
Part Number: A24713
The Python XL-DA25 is a product line extension to the current Python XL-DA product family so it uses the same double-acting technology and can achieve nearly double the flow rate of a similar single-acting pump. The Python XL-DA25 comes with a 2.5 in. pump stroke covering a wide range of flow rates...
More Info
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
The Python XL-DA25 is a product line extension to the current Python XL-DA product family so it uses the same double-acting technology and can achieve nearly double the flow rate of a similar single-acting pump. The Python XL-DA25 comes with a 2.5 in. pump stroke covering a wide range of flow rates. These pumps operate on low gas or compressed air pressures and utilize the same Merkur® air motor used on other Graco products. The wetted parts are all 316 stainless steel and the air motor comes with a Graco proprietary coating suitable for off-shore applications.
- Double Acting
- Pumps fluid in both directions of the stroke for increased flows
- Provides continuous flow operation for better pump efficiencies
- 2.5 inch pump stroke for high flow rates
- Self-Priming
- Anti-locking so air cannot get trapped inside air motor and stall pump
- Pump can free itself of air and resume pumping without any adjustments
- Ease of Serviceability
- Simple pump design for quick seals replacement
- Pumps are installed vertically for a reduced footprint •Minimum number of tools required
- Environmentally friendly
- Gas recovery kit available for zero emissions!
- Recoverable exhaust gas with kit
- Less fugitive emissions
Specifications & Documents
Technical Specifications
Convert to Metric| Air Inlet Size (in) | 1 |
|---|---|
| Air Inlet Thread Gender | Male |
| Air Inlet Thread Type | NPT |
| Air Motor Size (in) | 7-1/2 |
| Approvals | ATEX |
| Fluid Inlet Type | NPT |
| Fluid Outlet Size (in) | 1/4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NF4 |
| Maximum Cycle Rate (CPM) | 60 |
| Maximum Flow Rate (GPD) | 1388 |
| Maximum Working Pressure (MPa) | 42.1 |
| Maximum Working Pressure (psi) | 6100 |
| Minimum Air Inlet Pressure (psi) | 15 |
| Minimum Flow Rate (GPM) | 260 |
| Model | Python |
| Plunger Rod Coating | Chromex |
| Plunger Size (in) | 1 |
| Series | XL-DA25 |
| Type | Pneumatic Chemical Pump |
| Weight (lb) | 65.56 |
| Air Inlet Size (in) | 1 |
| Air Inlet Size (mm) | 25.4 |
| Air Inlet Thread Gender | Male |
| Air Inlet Thread Type | NPT |
| Air Motor Size (in) | 7-1/2 |
| Approvals | ATEX |
| Fluid Inlet Type | NPT |
| Fluid Outlet Size (in) | 1/4 |
| Fluid Outlet Size (mm) | 6.35 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NF4 |
| Maximum Cycle Rate (CPM) | 60 |
| Maximum Working Pressure (MPa) | 42.1 |
| Maximum Working Pressure (bar) | 421 |
| Maximum Working Pressure (kPa) | 42100 |
| Maximum Working Pressure (psi) | 6100 |
| Minimum Air Inlet Pressure (psi) | 15 |
| Model | Python |
| Plunger Rod Coating | Chromex |
| Series | XL-DA25 |
| Type | Pneumatic Chemical Pump |
| Weight (kg) | 29.8 |
Product Manuals
Sales Literature
Certifications
MSD201EN, Loctite 567 Low Strength Thread Sealant, Safety Data Sheet, English
(141 KB)
(English Only)
