Laird T-Putty 508
Thermal Paste for Heat Dissipation | Laird
Material Supplier:
Laird
Industry:
Electronics
Application:
Thermal Management
Material Specs:
- Laird T-Putty 508
Typical Properties:
- Construction: Ceramic Filled Silicone Based
- Thermal Conductivity (W/mK): 3.5
- Color: Green
- Flow Rate (grams/Min): 40 (.125” orifice @ 90psi
- Density (g/cc): 3.2
- Volume Resistivity (ohm-cm): 2 x 10
- Outgassing (%TML/%CVCM) by mass: .05/.01
- Operating Temp: -40 – 150c
Graco C300 Automated Dispense Table with Graco Dispensit valve system
C300 Automation Table:
- Work envelope of 300 mm X / 300 mm Y / 75 mm Z
- Approximate overall dimensions 910 mm X 910 mm X 1800 mm including safety enclosure
- Easy and intuitive on-boardoperator controls
- 15 kg load capability
200 mm/s point to point; 100 mm/s dispense speed
Material & application dependent
Repeatability of the machine is ± 0.01 mm (0.0004 in)
- Accuracy is ± 0.1 mm/300 mm (± 0.004 in/12 in)
- 3D contouring dispense capability
- Servo drive motors for X, Y, Z and dispense axis (theta)
- Ball screw drives with linear guide bearings
- Needle feature options
– Automatic needle calibration and clean
- Optional Y slides to increase cycle time
- Light curtain, guarding, and safety interlock system
- Real-time process monitoring with data download
- Proprietary Graco software with easy to use interface
1053 1k Dispense Valve:
- Servo motor driven 1K dispense valve
- Stainless steel metering rod with PTFE sleeve
- Stainless steel spool inlet/outlet valve with PTFE sleeve
- Shot size range: 0.054 to 3.60 cc per stroke, larger shots achieved with multiple strokes
- Outlet needle range 12 to 14 gauge
Supply System:
- Dynamite, single acting supply pump
- 1 gallon pail follower plate
- Air driven pump with 12:1 power factor
- Stainless steel construction
- 5cc per stroke displacement
- Includes connection hoses and fittings to dispense valve
Laird is a registered trademark of Laird PLC.
Graco Precision Automated Dispense
The Graco UniXact dispense platform delivers automated, high-precision fluid dispensing – specializing viscous, high centipoise and 2K materials. With an intuitive user interface for non-technical operators, a fully automated precision fluid dispense system has never been easier to use. Learn more about the UniXact automated dispense platform.
One Complete Platform Solution
The Graco UniXact is the ONLY fully-integrated automated dispense solution where all of the components are developed and supported by ONE worldwide source. UniXact features:
- A Cartesian robot that moves the dispense valve relative to the part through XYZ space
- Proven Graco supply system components to easily manage tough-to-move materials
- Industry-leading dispense valves that provide unmatched accuracy
- Motion tables that provide unlimited customization through XYZ motion
Graco is dedicated to providing the highest level of service through our knowledgeable, qualified global team of distributors.