Tremco Proglaze II

Material Supplier:

Tremco® Commercial Sealants & Waterproofing

Industry:

Insulated Glass Industry

Application:

Structural Glazing

Material Specs:

•  Proglaze® II – A High Performance, Multi-Component Structural Silicone Sealant

Typical Properties:

• Color: Black
• Ratio (A:B) by weight: 11.6:1
• Snap Time: 30-40 minutes at 11.6:1 ratio, dependent upon temperature and relative humidity
• Calibration Factors
  • Base (A): 0.2010
  • Catalyst (B): 0.0890

Graco Equipment

• Graco ExactaBlend™ AGP Advanced Glazing Proportioner
• Proportioner Part Number:
  • With Boom: 24R809
  • Without Boom: 24R810

Delivery Method

• Hose Kit: 24R832
  • Base Hose: 5/8 in x 10 ft (15.88 mm x 3.0 m)
  • Catalyst Hose: 1/8 in x 5 ft (3.18 mm x 1.5 m) and 1/8 in x 5 ft (3.18 mm x 1.5 m)
• MD2 Valve with 1/2 x 36 Element Mixer
  • Applicator Kit : 24P217
  • 1/2 x 36 Element Mixer: 512286
  • Shroud: 16T003
  • Min. Flow Rate*: 500 g/min
  • Max. Flow Rate*: 1300 g/min
• UL6000 Valve with Tri-Core mixer
  • Applicator Kit: 24P221
  • Min. Flow Rate*: 540 g/min
  • Max. Flow Rate*: 2200 g/min

Typical Accessories

• Light Tower Kit: 24R824
• Caster Kit: 24T091
• Calibration Check Kit: 24R777

*Flow rate obtained from lab testing. Actual flow rates may vary depending on air supply system, temperature,applicator tip, etc. All written and visual data are based on the latest product information available. Graco reserves the right to make changes at any time without notice. All other brand names or marks are used for identification purposes and are trademarks of their respective owners. Exact equipment configuration will vary and depend on factors such as rate of output, length and size of hoses, bead size desired, and container sizes.

^{All trademarks and registered trademarks are the property of their respective owners.}

Improved Performance & Throughput

For insulating glass application, precise application of silicone materials is critical for delivering superior adhesion, durability and leak-free performance. Automated dispense of adhesive and silicone materials provides a more consistent and complete seal. Learn more about window & door manufacturing efficiencies.

On- Ratio Meter, Mix & Dispense

The Graco ExactaBlend AGP is a variable ratio system that accurately meters, mixes and dispenses two-component medium to high-viscosity sealants and adhesives. It is used to seal and bond glass to metal or aluminum structures. Advanced pumping technology creates a better, more consistent bead – which results in reduced rework and less wasted material. For unique applications, Graco can also custom-engineer an equipment solution in our 130,000 square foot testing lab. Learn more about the Exactablend AGP.