E-Flo DC 4-Ball
E-Flo DC 4-Ball Electric Circ Pump, 1000 cc, 2 HP, Adv, ATEX/FM/IECEx, Sealed, Ultralife Rod/Cyl, Tri-Clamp, Stand
Part Number: EC2441
![product image](/content/dam/pim/graco/ipd/liquid%20finishing/EFloDC_S4B_1201.jpg/_jcr_content/renditions/cq5dam.web.1280.1280.jpeg)
![product image](/content/dam/pim/graco/ipd/liquid%20finishing/22020.jpg/_jcr_content/renditions/cq5dam.web.1280.1280.jpeg)
![product image](/content/dam/pim/graco/ipd/liquid%20finishing/22012.jpg/_jcr_content/renditions/cq5dam.web.1280.1280.jpeg)
![product image](/content/dam/pim/graco/ipd/liquid%20finishing/EFlo_DC_4000.jpg/_jcr_content/renditions/cq5dam.web.1280.1280.jpeg)
![product image](/content/dam/pim/graco/ipd/liquid%20finishing/21942.jpg/_jcr_content/renditions/cq5dam.web.1280.1280.jpeg)
![product image](/content/dam/pim/graco/ipd/liquid%20finishing/EFlo_DC_1601.jpg/_jcr_content/renditions/cq5dam.web.1280.1280.jpeg)
Image is for illustrative purposes only.
Image is for illustrative purposes only.
Image is for illustrative purposes only.
E-Flo DC 4-Ball
E-Flo DC 4-Ball Electric Circ Pump, 1000 cc, 2 HP, Adv, ATEX/FM/IECEx, Sealed, Ultralife Rod/Cyl, Tri-Clamp, Stand
Part Number: EC2441
The E-Flo DC (Dual Control) electric circulating pump has been found to be up to five times more efficient than similar-sized pneumatic pumps – lowering your energy bill and saving you money
Features
Product Brochure
The E-Flo DC (Dual Control) electric circulating pump has been found to be up to five times more efficient than similar-sized pneumatic pumps – lowering your energy bill and saving you money
- The sealed lower has longer maintenance cycles and can be used for every pumping application in your mix room, including catalysed coatings
- Minimal pulsation at changeover provides a more consistent finish
- Electric motor eliminates icing – giving you smoother pump operation and better finished product
- Quiet electric motor improves your work environment, allowing you to remain near the pump for longer periods of time
Specifications & Documents
Technical Specifications
Convert to ImperialApplication | Circulation |
---|---|
Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC |
Fluid Inlet Size (in) | 1-1/2 |
Fluid Outlet Size (in) | 1-1/2 |
Fluid Section Type | Sealed |
Input Voltage (V ac) | 250 |
Material | Stainless Steel |
Maximum Continuous Cycle Rate (CPM) | 20 |
Maximum Flow Rate (GPM) | 5.25 |
Maximum Input Amperage (A) | 20 |
Maximum Operating Temperature (°F) | 104 |
Maximum Working Pressure (MPa) | 2.8 |
Maximum Working Pressure (psi) | 400 |
Minimum Operating Temperature (°F) | 32 |
Model | E-Flo |
Motor Type | AC |
Portable | Non-Portable |
Power Rating (HP) | 2 |
Series | DC 4-Ball |
Type | Electric Piston Pump |
Application | Circulation |
Compatible Material | Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC |
Fluid Inlet Size (in) | 1-1/2 |
Fluid Inlet Size (mm) | 38.1 |
Fluid Outlet Size (in) | 1-1/2 |
Fluid Outlet Size (mm) | 38.1 |
Fluid Section Type | Sealed |
Input Voltage (V ac) | 250 |
Material | Stainless Steel |
Maximum Continuous Cycle Rate (CPM) | 20 |
Maximum Flow Rate (L/min) | 19.87 |
Maximum Input Amperage (A) | 20 |
Maximum Operating Temperature (°C) | 40 |
Maximum Working Pressure (MPa) | 2.8 |
Maximum Working Pressure (bar) | 27.6 |
Maximum Working Pressure (kPa) | 2760 |
Maximum Working Pressure (psi) | 400 |
Minimum Operating Temperature (°C) | 0 |
Model | E-Flo |
Motor Type | AC |
Portable | Non-Portable |
Series | DC 4-Ball |
Type | Electric Piston Pump |
Repair Parts
Part No. | Description |
---|---|
26A401 | KIT,GEAR FOR E-FLO DC |
16U113 | KIT,REPLACEMENT,KNOB |
16J463 | COUPLER,FAN DRIVE |
26A398 | KIT,GEAR, E-FLO DC |
26A399 | KIT,RACK, E-FLO DC |
24R050 | KIT,PRESSURE,SENSOR |
24W920 | KIT, ADAPTER, CABLE HALL SWITCH |
26A395 | KIT,FAN, COMPLETE |
26A397 | KIT,ROTOR, E-FLO DC |
26A537 | KIT,BOLT |
26A442 | KIT,BEARING, E-FLO DC |
24U938 | KIT,ENCODER |
26A396 | KIT,FAN, ONLY |
26A539 | COVER,FAN |