Cart
Python XL DA
Python XL-DA Pneumatic Chemical Injection Pump, 4-1/2 in. Air Motor, 3/4 in. Plunger, Chromex Coated, FFKM Seals, CE Approved
Part Number: A22413
Python XL DA
Python XL-DA Pneumatic Chemical Injection Pump, 4-1/2 in. Air Motor, 3/4 in. Plunger, Chromex Coated, FFKM Seals, CE Approved
Part Number: A22413
Python XL-DA series pumps are suitable for chemical injection applications that require higher flows at high pressures. These pumps operate on low gas or compressed air pressures and utilise the same Merkur® air motor used on other Graco products. The Graco patented high efficiency air valve helps m...
More Info
Features
Python XL-DA series pumps are suitable for chemical injection applications that require higher flows at high pressures. These pumps operate on low gas or compressed air pressures and utilise the same Merkur® air motor used on other Graco products. The Graco patented high efficiency air valve helps minimise fugitive emissions and gas recovery can be achieved on specific models. The Python XL-DA pumps fluid in both stroke directions which provides continuous flow operation and prevents the pump from air locking.
- Double-Acting
- Pumps fluid in both directions of the stroke for increased flows
- Provides continuous flow operation for better pump efficiencies
- 2.5 inch pump stroke for high flow rates
- Self -Priming
- Anti-locking so air cannot get trapped inside air motor and stall pump
- Pump can free itself of air and resume pumping without any adjustments
- Ease of Serviceability
- Simple pump design for quick seals replacement
- Pumps are installed vertically for a reduced footprint
- Minimum number of tools required
- Environmentally friendly
- Recoverable exhaust gas with kit
- Less fugitive emissions
- 4.5 inch air motors come ready for a gas recovery add-on kit
Specifications & Documents
Technical Specifications
Convert to Imperial| Air Motor Size (in) | 4-1/2 |
|---|---|
| Application | Non-hazardous location |
| Approvals | CE |
| Fluid Inlet Size (in) | 3/4 |
| Fluid Inlet Thread Gender | Male |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (in) | 1/4 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Maximum Operating Temperature (°F) | 176 |
| Maximum Working Pressure (MPa) | 18.8 |
| Maximum Working Pressure (psi) | 2730 |
| Minimum Operating Temperature (°F) | -40 |
| Model | Python |
| Plunger Material | Chromex Coated |
| Plunger Size (in) | 3/4 |
| Seal Material | FFKM |
| Series | XL DA |
| Type | Pneumatic chemical pump |
| Air Motor Size (in) | 4-1/2 |
| Application | Non-hazardous location |
| Approvals | CE |
| Fluid Inlet Size (in) | 3/4 |
| Fluid Inlet Thread Gender | Male |
| Fluid Inlet Thread Type | NPT |
| Fluid Outlet Size (cm) | 0.635 |
| Fluid Outlet Size (in) | 1/4 |
| Fluid Outlet Size (mm) | 6.35 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPT |
| Maximum Operating Temperature (°C) | 80 |
| Maximum Working Pressure (MPa) | 18.8 |
| Maximum Working Pressure (bar) | 188 |
| Maximum Working Pressure (kPa) | 18800 |
| Maximum Working Pressure (psi) | 2730 |
| Minimum Operating Temperature (°C) | -40 |
| Model | Python |
| Plunger Material | Chromex Coated |
| Plunger Size (cm) | 1.9 |
| Plunger Size (mm) | 19.1 |
| Seal Material | FFKM |
| Series | XL DA |
| Type | Pneumatic chemical pump |
Product Manuals
