Cart
i-Series 1.5"
1.5 in. (38.1 mm) i-Series Polypropylene Pulsation Dampener with PP Seats and BN Diaphragm
Part Number: 2000470
i-Series 1.5"
1.5 in. (38.1 mm) i-Series Polypropylene Pulsation Dampener with PP Seats and BN Diaphragm
Part Number: 2000470
Reducing pulsation and vibration in your system will reduce stress on downstream equipment and increase system efficiency. Pulsation dampeners can improve the performance and reliability of your fluid transfer process
Features
Product Brochure
Reducing pulsation and vibration in your system will reduce stress on downstream equipment and increase system efficiency. Pulsation dampeners can improve the performance and reliability of your fluid transfer process
Excess pulsation causes noise, plumbing damage and even product degradation. Dampeners reduce pulsation and vibration, extending the life of your system while maintaining the integrity of the material being pumped.
- Controlled pulsation for more consistent flow, while minimising system vibration. Creating a safer work environment.
- Reduce stress on equipment which improves equipment life, resulting in less maintenance. Absorbing surges and reducing spikes in pressure relieves stress on your pump and system.
- Minimises potential fluid shearing; improves product quality, reducing cost.
Specifications & Documents
Technical Specifications
Convert to Imperial| Connection Type | Flange |
|---|---|
| Diaphragm Material | Buna-N |
| Fluid Section Material | Polypropylene |
| Hazardous location approved | None |
| Inlet Size (in) | 1.5 |
| Maximum Flow Rate (GPM) | 90 |
| Maximum Fluid Pressure (MPa) | 0.69 |
| Maximum Fluid Pressure (psi) | 100 |
| Maximum fluid operating temperature (°C) | 66 |
| Maximum fluid operating temperature (°F) | 150 |
| Minimum fluid operating temperature (°C) | 0 |
| Minimum fluid operating temperature (°F) | 32 |
| Model | i-Series |
| Outlet Size (in) | 1.5 |
| Seat Material | Polypropylene |
| Series | 1.5" |
| Type | Pulsation Dampener |
| Wetted Material | Polypropylene |
| Connection Type | Flange |
| Diaphragm Material | Buna-N |
| Fluid Section Material | Polypropylene |
| Hazardous location approved | None |
| Inlet Size (cm) | 3.81 |
| Inlet Size (in) | 1.5 |
| Inlet Size (mm) | 38.1 |
| Maximum Flow Rate (L/min) | 341 |
| Maximum Fluid Pressure (MPa) | 0.69 |
| Maximum Fluid Pressure (bar) | 6.9 |
| Maximum Fluid Pressure (kPa) | 689 |
| Maximum Fluid Pressure (psi) | 100 |
| Maximum fluid operating temperature (°C) | 66 |
| Maximum fluid operating temperature (°F) | 150 |
| Minimum fluid operating temperature (°C) | 0 |
| Minimum fluid operating temperature (°F) | 32 |
| Model | i-Series |
| Outlet Size (cm) | 3.81 |
| Outlet Size (in) | 1.5 |
| Outlet Size (mm) | 38.1 |
| Seat Material | Polypropylene |
| Series | 1.5" |
| Type | Pulsation Dampener |
| Wetted Material | Polypropylene |
Product Manuals
