THERM-A-GAP TC50

High-performance dispensable thermal putty | Parker Chomerics

Parker Chomerics

THERM-A-GAP TC50

PRODUCT DESCRIPTION:

The Parker Chomerics THERM-A-GAP™ TC50 is a high performance, one component, dispensable thermal compound developed to conduct heat between a hot component and a heat sink or enclosure. 

PRODUCT CHARACTERISTICS:

Colour: Grey

Operating temperature: -67  to 392°F  (-55 to 200°C)

Thermal conductivity (W/mk): 5.0 

Flow rate (grams/min @90 psi): 10g

Density: 3.25

Volume resistivity (ohm-cm): 10"

Outgassing (%TML / %CVCM by mass): 0.07%

Recommended uses:

  • Automotive electronic control units
  • Power supplies and semiconductors
  • Memory and power modules
  • Microprocessors
  • Consumer electronics

For complete product information, please refer to ph.parker.com

 

Graco system solution:

 

UNIXACT C300 AUTOMATION TABLE:

  • Work envelope: (X-Y-Z): 254 mm x 277 mm x 70 mm (10 in x 11 in x 2.75 in) 
  • Approximate overall dimensions: 1905 mm x 939 mm x 1041 mm (75 in x 37 in x 41 in) 
  • Drive method: ball screw drives with linear guide bearings
  • Drive system: servo drive motors for X, Y, Z, and theta (dispense)
  • Accuracy: +/- 0.1 mm/300 mm (+/- 0.004 in/12 in)
  • Position repeatability: 0.01 mm (0.0004 in)
  • Dispense speed: 100 mm/s (4 in/s)

PROGRESSIVE CAVITY PUMP:

  • Consists of a rotor and stator that create sealed cavities for the material to flow through. 
  • With high accuracy and repeatability, Graco's progressive cavity pump is well-suited for abrasive materials
  • Continuous, volumetric dispense with high repeatability
  • Wide range of adjustable flow rates
  • Wear-resistant and low maintenance
  • Available in several volumes for application flexibility

DYNAMITE 22 SUPPLY SYSTEM:

  • The ideal solution for delivering precise and consistent material feed from small containers ranging from 300 cc cartridges to 1 gallon pails
  • Extensive product lifecycle even for heavy duty applications using highly viscous, abrasive materials
  • With a minimum weight of 28kg, the mini extruders are suitably designed to reduce space requirements and allowing great flexibility
  • Simple, user-friendly design

For complete product information, please refer to ph.parker.com

Download the spec. sheet

Contact an expert

Please enter a value
Please select
Please enter a value
Please enter a value
Please select
Please enter a value
Please enter a value

Recommended products

For applying THERM-A-GAP TC50

Do You Have Product Questions?

Technical Support

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

General Support

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Graco