Tflex CR607
Two-part, cure-in-place (CIP) dispensable gap filler | Laird
Laird Tflex CR607
Product description:
This dispensable gap filler minimises stress on components during assembly while providing the reliability of a traditional thermal pad. Tflex™ CR607 has been designed for reliability, intended to pass stringent vertical shock and vibe requirements of the automotive industry.
Product characteristics:
Colour: Blue
Thermal conductivity (W/mk): 6.40
Construction: Ceramic filled silicone
Mix ratio: 1:1
Operating temperature range: -55ºC – 200ºC
Density (g/cc): 3.5
Volume resistivity (ohm-cm): 10
Recommended uses:
- Automotive
- Telecommunications
- Consumer electronics
For complete product information, please refer to laird.com
Graco system solution:
UniXact C300 automation table:
- Work envelope: (X-Y-Z): 254 mm x 277 mm x 70 mm (10 in x 11 in x 2.75 in)
- Approximate overall dimensions: 1905 mm x 939 mm x 1041 mm (75 in x 37 in x 41 in)
- Drive method: ball screw drives with linear guide bearings
- Drive system: servo drive motors for X, Y, Z, and theta (dispense)
- Accuracy: +/- 0.1 mm/300 mm (+/- 0.004 in/12 in)
- Position repeatability: 0.01 mm (0.0004 in)
- Dispense speed: 100 mm/s (4 in/s)
PRX metering, mix and dispense systems
- A two-component dispense system is ideal for applications requiring both precision fluid dispensing and tight ratio tolerances
- It provides superior control and repeatability, dispense for beads, dots and other patterns to ensure specifications are met every single time
- True first-in-first out fluid path
- Engineered fluid handling with durable parts
- Compact, lightweight, and designed for integration
- Available in cartridge feed, supply pump feed, directly mounted dispense valve, and remote mounted dispense valve solutions
Dynamite 22 supply system:
- The ideal solution for delivering precise and consistent material feed from small containers ranging from 300 cc cartridges to 1 gallon pails
- Extensive product lifecycle even for heavy duty applications using highly viscous, abrasive materials
- With a minimum weight of 28kg, the mini extruders are suitably designed to reduce space requirements and allowing great flexibility
- Simple, user-friendly design
Laird is a registered trademark of Laird PLC. For complete product information, please refer to laird.com
Download the spec. sheet