Bondway 8868

Thermally conductive adhesive polyurethane | Bondway

Bondway

Bondway 8868 thermal interface material

Bondway® 8868 is a thermally conductive adhesive polyurethane refined from polyether-modified polymer alloy. The two-component thermal interface material (TIM) brings high bonding strength and good thermal conductivity to battery and electronic components.
 

Product characteristics

 Part APart B
ColourBlackWhite
Grey (combined)
Viscosity6000 - 20000 cps5000 - 50000 cps
10000-50000 cps (combined)
Thixotropy index2 - 53 - 6
Density2.40 - 2.60 g/cm³2.50 - 2.70 g/cm³
2.45 - 2.65 g/cm³ (combined)
Mix ratioBy volume:100100
By weight100105
Open time≥30 min 
Thermal conductivity≥1.5 W/ (m.k) 
Hardness50 - 70 Shore D
Applicable temperature range-40˚C to 85˚C
   

Recommended uses:

Bondway 8868 two-component thermal interface material can be used for bonding, fixing, and heat dissipation of heat-generating electronic components.

For more information about Bondway material, refer to bondwaycn.com.
 

Solutions for applying Bondway 8868 thermally conductive adhesive

Dispensing solutions for Bondway 8868 thermally conductive adhesive polyurethane must withstand the highly filled and abrasive material. That is why Graco provides a complete system with Elite construction to meet Bondway 8868 application requirements*.

  • Supply pumps: Check-Mate supply pumps provide advanced durability and reliability for transferring material.
  • Metering mix and dispense system:  Graco’s Hydraulic Fixed Ratio (HFR) system delivers unmatched durability, performance for two-component materials.
  • Dispense valves MD2 valves with Elite construction have been proven to dispense nearly 3,000 litres (more than 2 million cycles) of TIM blend with no failures detected.**

* Additional Elite construction system configurations are available depending on the application and performance requirements.

 **Results may vary. Variables affecting component life include, but are not limited to, material chemistry/fillers, flow rate, cycle rate, maintenance diligence, and system pressure.
 

Elite construction withstands Bondway 8868

Graco tested how Check-Mate supply pumps and the HFR system with Elite construction performed while mixing, metering and dispensing Bondway 8868 thermally conductive adhesive polyurethane.

System configuration for two-component Bondway dispense testing includes HFR with Elite construction and 100cc supply pumps with Elite construction.

The equipment with Elite construction dispensed at least 50,000 gallons (200,000 litres) before any wear on pump pistons and cylinders was noticed.

All trademarks and registered trademarks are the property of their respective owners.

Contact an expert

Graco provides complete, end-to-end system solutions for applying Bondway 8868 and other thermal interface materials. Contact our experts about how we can configure a system to meet your application requirements.

Please enter a value
Please select
Please enter a value
Please enter a value
Please select
Please enter a value
Please enter a value

Do You Have Product Questions?

Technical Support

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

General Support

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Graco