QSil 6101

Material supplier:

Quantum Silicones

Industry:

Solar PV panel assembly

Application:

Junction box potting

Material specs:

• QSil 6101
• 100% solids
• Solvent free
• Fast cure time
• HB flame compliant
• Low modulus
• Good primerless adhesion to a variety of substrates

Typical properties:

• Ratio by volume: 10:1
• Ratio by weight: 100:8
• Viscosity:
  • Base 6,000 cps
  • Catalyst 448 cps
• Chemistry:
  • Two component silicone
• Pot life:
  • Approximately 3 minutes
• Mixed colour: Black

Graco PR70 metering, mix and dispense system with Graco Control Architecture™

Configuration

• Part number: PR7E-DAWA1EACA334411JAJAANN2
• PR70 fixed ratio at 10:1 parts by volume
• Advanced display module
• Hydracheck flow control valve
• MD-2 dispense valve with adjustable snuff back with 10:1 nose
• 3/8 in (9.5mm) x 36 disposable static mixer and shroud
• 3/16 in x 21 ft (4.7 mm x 6.4 m) and 1/2 in x 21 ft (12.7 mm x 6.4 ft) hoses
• Pressure transducers with alarm system
• High & low volume 30 litre stainless steel gravity feed reservoir
• High volume reservoir equipped with automatic high / low level sensors and automatic material transfer controls
• 5:1 55 gallon drum supply pump for high volume reservoir
• Nitrogen harness assembly reservoir or dessicant fixture for moisture sensitive catalyst

*The exact equipment configuration will vary and depends on factors such as rate of output, length and size of hoses,bead size desired, and container sizes. Graco material test: DR3218.

All written and visual data are based on the latest product information available. Graco reserves the right to make changes at any time without notice. All other brand names or marks are used for identification purposes and are trademarks of their respective owners

Precision dispense

The Graco PR70 is a compact, reliable benchtop fixed and variable ratio meter, mix and dispense system that accurately meters, mixes and dispenses two-component medium to high-viscosity materials for a broad range of applications including bonding, sealing, potting, gasketing, encapsulation and syringe filling. Standard features include electric controls, digital shot entry, gel timer, purge and preventative maintenance counters.

Posi-ratio by positive displacement

The Graco PR70 uses positive displacement pumps to deliver unmatched consistency with ratio accuracy to ± 1% and two times increase in Mean Time Before Failure (MTBF). Multiple configurations support a wide variety of applications with a ratio range from 1:1 to 24:1 with variable drive and shot sizes from 2 to 70m ccs. The stainless steel design reduces the chance of material incompatibility while long-lasting wear parts mean lower cost of ownership. Learn more about the PR70.