CHOFORM 5528

Form-in-place (FIP) silicone EMI gasket | Parker Chomerics

Parker Chomerics

Parker Chomerics CHOFORM 5528

PRODUCT DESCRIPTION:

The CHOFORM® 5528 form-in-place EMI gasket is a moisture cure silicone system with >70 dB shielding effectiveness while providing a soft, low closure force gasket.

PRODUCT CHARACTERISTICS:

Colour: Red

Cure system: Moisture

Volume resistivity (Ω-cm): 0.003

Bead size:

  • Smallest recommended: 0.018 x 0.022 (0.46 x 0.56)  
  • Largest recommended (single pass): 0.042 x 0.049 (1.07 x 1.24)

Recommended uses:

  • Densely populated electronics packaging
  • PCB inter-compartmental isolation with thin wall boundaries
  • Castings, machined metal, and conductive plastic enclosures
  • Transportation/Automotive sensor housing
  • Military and Aerospace electronics
  • Telecommunications

For complete product information, please refer to ph.parker.com

 

Graco system solution:

 

UNIXACT C300 AUTOMATION TABLE:

  • Work envelope: (X-Y-Z): 254 mm x 277 mm x 70 mm (10 in x 11 in x 2.75 in)
  • Approximate overall dimensions: 1905 mm x 939 mm x 1041 mm (75 in x 37 in x 41 in) 
  • Drive method: ball screw drives with linear guide bearings
  • Drive system: servo drive motors for X, Y, Z, and theta (dispense)
  • Accuracy: +/- 0.1 mm/300 mm (+/- 0.004 in/12 in)
  • Position repeatability: 0.01 mm (0.0004 in)
  • Dispense speed: 100 mm/s (4 in/s)

PROGRESSIVE CAVITY PUMP:

  • Consists of a rotor and stator that create sealed cavities for the material to flow through. 
  • With high accuracy and repeatability, Graco's progressive cavity pump is well-suited for abrasive materials
  • Continuous, volumetric dispense with high repeatability
  • Wide range of adjustable flow rates
  • Wear-resistant and low maintenance
  • Available in several volumes for application flexibility

DYNAMITE 22 SUPPLY SYSTEM:

  • The ideal solution for delivering precise and consistent material feed from small containers ranging from 300 cc cartridges to 1 gallon pails
  • Extensive product lifecycle even for heavy duty applications using highly viscous, abrasive materials
  • With a minimum weight of 28kg, the mini extruders are suitably designed to reduce space requirements and allowing great flexibility
  • Simple, user-friendly design

Download the spec. sheet

Contact an expert

Please enter a value
Please select
Please enter a value
Please enter a value
Please select
Please enter a value
Please enter a value

Recommended products

For applying CHOFORM 5528

Do You Have Product Questions?

Technical Support

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

General Support

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Graco