SYLGARD™ 170

Fast cure silicone elastomer | DOW

Dow

Sylgard™ 170

Product description:

SYLGARD™ 170 fast cure silicone elastomer is a two-part general purpose encapsulant with low viscosity, good flow ability, and flame resistance that cures fast at room temperature. Supplied as a two-part liquid component kit, the Dow silicone encapsulants have a mix ratio of 1 to 1 that cures to a flexible elastomer. This thermally conductive material can be used in LED lighting, industrial controls, high voltage resistor packs, and more. It is also sufficient in protecting the assembly of electrical/PCB systems. Application methods for this material include automated metered mixings and dispensing, which requires the right equipment to ensure proper ratios and process efficiency. 

Video: Battery encapsulation using DOW SYLGARD™ 170

Product characteristics: 

Colour :

Viscosity (mixed): 2,361

Operating temperature range: 25°C to 60°C (77°F to 140°F)

Working time at 25ºC (pot life): 3.9 minutes

Cure time at 25ºC: 12 minutes

Dielectric protection (dielectric strength): 14 kV/mm

Tensile strength: 3.7 MPa

Elongation: 125%

Thermal conductivity (W/mk): 2.0

UL recognition: 94 V-0
 

Typical uncured properties:

   
Property Part APart B  
ColourBlackBeige  
Specific gravity (uncured)1.381.38  
Viscosity at 25ºC3,436 cps1,287 cps  
Mix ratio by volume11  

 

 

  

NOTE: The SYLGARD™ 170 can cure at room temperature or heat-accelerated. The curing speed varies with temperature and humidity.
 

Recommended uses:

  • PCB system architectures
  • Potting of high-voltage transformers, connectors, and sensors
  • Assembly of substrates to heat sinks

For complete product information, please refer to dow.com.

 

Graco metering, mix and dispense system solutions:

Graco offers multiple solutions to effectively meter, mix, and dispense the two-part SYLGARD™ 170 fast cure silicone elastomer.
 

Check-Mate supply system:

  • Pressure ratio range: from 5:1 to 85:1
  • Minimises leftover material and reduces waste.
  • Optimal for transferring sealants or adhesives to one or more operator dispensing stations 
  • Can feed high volume applicators, multiple meters or proportioners 
  • Tracks material usage and flow
  • High flow and pressures increase production 

EFR:

  • Fit for two-component materials like the SYLGARD™ 170
  • Highly accurate, even with low flow rates
  • Superior control over material and dispensing of gasket, beads, and potting applications
  • Capable of handling a wide range of materials
  • Easy to configure, operate and maintain

MD2:

  • Ideal for two-component applications
  • Accurately dispenses and mixes two-component sealants and adhesives
  • Featured applications include bonding, potting, encapsulation, and thermal management
  • Maximum viscosity of 1,000,000 cps

Contact an expert

Please enter a value
Please select
Please enter a value
Please enter a value
Please select
Please enter a value
Please enter a value

Recommended products

For applying Sylgard 170

Do You Have Product Questions?

Technical Support

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

General Support

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Graco