Chase & Sons A162A
Semi-conducting thermoplastic compound | Chase Corp
Material supplier:
Chase Corporation
Industry:
Wire and cable
Application:
Moisture block primary cable coating.
Dispensing a hot-applied, butyl-based, inert compound such as Chase BlH2Ock® into a heated coating head where bare cable strands are pulled through during the stranding process. The coating fills the interstices between the wire strands, thus preventing ingress & migration of moisture into the cable. The coating can also facilitate adhesion of moisture swellable powder applied downstream, which further inhibits moisture penetration. The dispense temperature ranges from 300°F to 375°F (149°C to 191°C).
Material specs:
- Chase & Sons® A162A
- Chase BlH2Ock® strand fill
Chase & Sons® A162A is a unique, flexible, semi-conducting thermoplastic compound designed as a strand-filling, water-blocking agent for stranded conductor power cables. Pumped into the interstices of the stranded conductor core during the stranding operation, Chase BlH2Ock® is designed to prevent ingress and longitudinal migration of water within the conductor.
Typical properties:
- Specific gravity: 1.17
- Resistivity: 5000 Ω max
- Melt index: 35-70 g/10min @ 150° C
- Colour: Black
- Packaging: 55 gallon drums, fibre or steel
Graco Equipment
- Therm-O-Flow® 200 70:1
- Mega-Flo™ platen
- High flow Endure™ valve
Recommended configuration
- Ten heat zones
- 6.5 in (16.5 cm) pneumatic ram
- Light tower
- Dual post saddle clamps
- Low and empty level sensors
- Tandem option
- 15 to 30 ft (4.6 to 9 m) hose
The Graco advantage
- Higher melt and flow rate
- Improved productivity: can dispense up to 11 lb (5 kg) per minute with a #20 hose (15 ft/4.6m)
- Tandem option
- Local service & support
All written and visual data are based on the latest product information available. Graco reserves the right to make changes at any time without notice. All other brand names or marks are used for identification purposes and are trademarks of their respective owners. The exact equipment configuration will vary and depend on factors such as rate of output, length and size of hoses, bead size desired, and container sizes.
The highest throughput capacity in the industry
Graco Therm-O-Flow® bulk hot melt adhesive systems consistently outperform the competition and provide the best performing industrial bulk hot melt supply systems on the market. Therm-O-Flow provides a throughput capability more than 200% higher than the leading competitor when using PSA and butyl hot melt adhesives.
Therm-O-Flow’s advanced temperature control capability and melt-on-demand process virtually eliminates overheated material, resulting in a better adhesive quality and reduced rework due to degraded material. Learn more about the Therm-O-Flow 200.