Cart
Choosing the Right Pump for Euclid Products
Pump Selection Based on Mortar Application
When switching from hand-applying to pumping or spraying a mortar-based material, it's important to select the right equipment for the job. Below are Euclid Chemical materials that have been field tested with Graco pumps so you know what works best and are set up for success.
Should you have questions or would like to talk to an expert about a material not listed here, please fill out the form on this page and we will get you in touch with a Graco representative.
Cement-Based Waterproofing Finish
| Material | Pump | Power | Hose | Minimum Compressor | Spraying |
| Tamoseal | T-MAX 6912 | 110 V | 50' of 1" hose + 10' of 3/4" hose | 100 CFM, 90 PSI | 80-100 PSI |
Epoxy Coating
| Material | Pump | Power | Hose | Minimum Compressor | Spraying |
| Duralkote 240 | ToughTek M680a | Pneumatic | 50' of 1" hose +10' of 3/4" hose | 100 CFM, 90 PSI | HTX with 4mm orifice |
| Duralkote 500 | ToughTek M680a | Pneumatic | 50' of 1" hose +10' of 3/4" hose | 100 CFM, 90 PSI | HTX with 4mm orifice |
Repair Mortar
| Material | Pump | Power | Hose | Minimum Compressor | Spraying |
| Tamms Structural Mortar | ToughTek S340e | 220 V / 110 V | 50' of 1 3/8" hose | 10 CFM, 40 PSI | 1/4" orifice spray wand |
| Tamms Structural Mortar | ToughTek M680a | 220 V / Pneumatic | 50' of 1" hose +10' of 3/4" hose | 10 CFM, 40 PSI | 1/4" orifice spray wand |
| EucoRepair V100 | ToughTek S340e | 220 V / 110 V | 50' of 1 3/8" hose | 10 CFM, 40 PSI | 1/4" orifice spray wand |
| EucoRepair V100 | ToughTek M680 | 220 V / Pneumatic | 50' of 1 3/8" hose | 10 CFM, 40 PSI | 1/4" orifice spray wand |
| EucoRepair SCC | ToughTek P30HT | 220 V | 50' of 1 3/8" hose | n/a | n/a |
| Versaspeed LS 100 | ToughTek P30HT | 220 V | 50' of 1 3/8" hose | n/a | n/a |
Self-Leveling Underlayment
| Material | Pump | Power | Hose | Minimum Compressor | Spraying |
| Super Flo Top | ToughTek MP40 | 220 V | 100' of 1 3/8" hose | n/a | n/a |
| Eucofloor SL160 | ToughTek MP40 | 220 V | 100' of 1 3/8" hose | n/a | n/a |
| Level Top Stain | ToughTek MP40 | 220 V | 100' of 1 3/8" hose | n/a | n/a |
| Level Top Polish | ToughTek MP40 | 220 V | 100' of 1 3/8" hose | n/a | n/a |
| Level Top PC-AGG | ToughTek MP40 | 220 V | 100' of 1 3/8" hose | n/a | n/a |
| Level Top PC-AGG | ToughTek P30HT | 220 V | 250' of 1 3/8" hose | n/a | n/a |
Stampable Overlay (Grout)
| Material | Pump | Power | Hose | Minimum Compressor | Spraying |
| Thin-Crete Vertical Grout | ToughTek S340e | 220 V / 110 V | 50' of 1 3/8" hose | 10 CFM, 40 PSI | 1/2" orifice spray wand full pressure |
Water-Based Acrylic Coating
| Material | Pump | Power | Hose | Minimum Compressor | Spraying |
| Tammscoat | T-MAX 6912 | 110 V | 50' of 1" hose + 10' of 3/4" hose | 10 CFM, 40 PSI | 80-100 PSI |
WATCH: ToughTek Successfully Pumps Euclid Chemical Mortar Materials
Contact an Expert
Related Articles
50,000 Square Feet Of Slu In One Day
A five-person crew accomplished this lofty task by utilizing today's pumping equipment
Portable Pumps Give Stucco and EIFS Contractors New Flexibility
Recent advances in portable stucco pumps have provided contractors new flexibility. Weighing in at approximately 200 pounds, the portable units allow work to be accomplished with smaller crews, smaller equipment footprints and improved transportability.
Reducing SLU Scheduling Issues
With SLU pumping, scheduling challenges can be greatly reduced. Placement can generally be completed faster with fewer people. Since larger rooms do not necessarily require additional workers, these resources can be applied elsewhere.
