GrindLazer HP DC1520 E DCS Self-Propelled Electric Scarifier, Low-Speed Pulley Kit
Part Number: 25R102
![product image](/content/dam/pim/graco/ced/pavement/25R102_GrindLazer_HP_DC1520_E_DCS_Main.jpg/_jcr_content/renditions/cq5dam.web.1280.1280.jpeg)
GrindLazer HP DC1520 E DCS Self-Propelled Electric Scarifier, Low-Speed Pulley Kit
Part Number: 25R102
The DC1520 E DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It is capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Product Brochure
The DC1520 E DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It is capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping.
All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters.
- Do-It-All Solution
- Adaptable for leveling, grooving, scarifying, and stripping coatings
- Up to 16 inch removal path
- Wide variety of cutters available
- Low-speed pulley kit for carbide flail cutters
- Quick-change side plate for easier drum removal
- Depth Control System
- Eliminate Measuring & Guesswork
- Quickly and precisely adjust the cutter depth with the push of a button
- Achieve accurate cut depth for leveling, grooving, and inlay
- Eliminate damage due to “dropped drums”
- DCS Controller
- Total Operator Control
- Easy adjustment via control panel buttons
- Set “zero point” where the cutter meets the surface
- Adjust cut depth in 0.01 inch increments
- Displays “active depth” from zero point
- English and metric units
- Robust design stands up to harsh job site environments
- Electronic components are protected against dust, debris, water, and vibration
- Self-Propelled
- Variable-speed hydrostatic drive allows user to dial in the speed for each application
- Designed for the Toughest Jobs
- All-steel chassis
- Low-vibration design
- Long-life bearings
- Powered by 20 HP Motor, 480V, 60Hz, 3ph
- Dust Removal
- Dust port for connecting to LazerVac vacuum systems
Specifications & Documents
Technical Specifications
Convert to MetricCutter Drum Diameter (in) | 10 |
---|---|
Cutter Type | Drum |
Depth Adjustment | Depth Control System (DCS) |
Engine Size (HP) | 20 |
Maximum Cut Rate (ft2/hr) | 3500 |
Maximum Cut Width (in) | 16 |
Product Series | High Production |
Type | Concrete Scarifier |
Vacuum Port | Yes |
Voltage (V) | 480 |
Cutter Drum Diameter (in) | 10 |
Cutter Type | Drum |
Depth Adjustment | Depth Control System (DCS) |
Maximum Cut Width (cm) | 41 |
Maximum Cut Width (mm) | 406 |
Product Series | High Production |
Type | Concrete Scarifier |
Vacuum Port | Yes |
Voltage (V) | 480 |