Cart
Sher-Loxane 800
Two-Component Polysiloxane | Sherwin-Williams
Sher-Loxane 800
Product Description:
SHER-LOXANE 800 is a versatile, high performance, two component polysiloxane (epoxy siloxane hybrid) that combines the properties of both a high performance epoxy and a polyurethane.
Intended uses:
Recommended for use on new construction, repair and fi eld maintenance coating projects. It provides eff ective long-term corrosion control and weatherability.
- Can be applied directly over inorganic zincs
- <100 g/L VOC, no isocyanates
- 20°F (-5°C) cure
PRODUCT CHARACTERISTICS:
Finish: Gloss and Semi-Gloss
Color: Wide range of colors available
Volume Solids: 90% ± 3%, mixed
VOC: <100 g/L; 0.77 lb/gal (EPA Method 24) 12gms/kilo*
Mix Ratio: 4:1 by volume
*content by weight from formulation, to satisfy EC Solvent Emissions Directive
Recommended Spreading Rate per coat:
| Minimum | Maximum | |
| Wet mils (microns) | 5.0 (125) | 7.0 (175) |
| Dry mils (microns) | 4.0 (100) | 6.0 (150) |
| ~Coverage sq ft/gal (sq m/L) | 240 (6.0) | 360 (9.0) |
| Theoretical coverage sq ft/gal (sq m/L) @ 1 mil / 25 microns dft | 1443 (35.4) | |
| NOTE: Brush or roll application may require multiple coats to achieve maximum film thickness and uniformity of appearance |
Application:
Airless Spray
| Pump | 35:1 minimum |
| Pressure | 2000 psi minimum (137 bar) |
| Tip | .015"-.019" (0.38-0.48 mm) |
Contact an Expert
Custom Equipment
Recommended Products
For spraying Sher-Loxane 800
Brochure Download
Oil & Natural Gas Industry Brochure: Sherwin-Williams and Graco
Download the Oil & Natural Gas Industry Brochure and see how Graco equipment matches-up with Sherwin-Williams coatings
