Dura-Plate 235

Product Description:

DURA-PLATE 235 Multi-Purpose Epoxy is a modifi ed epoxy phenalkamine, formulated specifi cally for immersion and atmospheric service in marine and industrial environments. Dura-Plate 235 provides exceptional performance in corrosive environment, and can be applied at temperatures as low as 0°F (-18°C).

Features:

• Self-priming
• Low temperature application, 0°F (-18°C)
• Surface tolerant - damp surfaces
• Provides salt water and fresh water immersion resistance
• Approved as a primer per MIL-PRF-23236, Type V, Class 7, Grade C (when mixed with Standard Hardener only)
• Outstanding application properties
• LV Hardener (B67V240) is formulated for CARB and OTC II VOC-restricted areas

PRODUCT CHARACTERISTICS:

Finish: Semi-Gloss

Color: Wide range of colors available

Volume Solids: 68% ± 2%, mixed

Weight Solids: 78% ± 2%, mixed

VOC (EPA Method 24): 

with Standard Hardener (EPA, OTC I):

    Unreduced: <280 g/L; 2.33 lb/gal

    Reduced 10%, R7K104: <340 g/L; 2.83 lb/gal

    Reduced 10%, R7K111: <280 g/L; 2.33 lb/gal

with LV Hardener (CARB, OTC II):

    Unreduced: <250 g/L; 2.08 lb/gal

    Reduced 10%, R7K111: <250 g/L; 2.08 lb/gal

Mix Ratio: 4:1 by volume

Recommended Uses:

For use over prepared steel and masonry surfaces.

• Salt water and fresh water immersion resistance
• Ballast tanks, off shore and marine structures
• Bilges and wet void areas
• Above- and below- water hull areas
• Decks and superstructures
• Water and waste water tanks
• Acceptable for use with cathodic protection systems.
• Dura-Plate 235 Black meets or exceeds the performance criteria of C-200; SSPC Paint 16; and MIL-P-23236B(SH), Type I or IV, Class 2
• Suitable for use in USDA inspected facilities
• Conforms to MPI # 101 (when mixed with Standard Hardener only)

*Note: For complete product information, please refer to sherwin-williams.com.