5 benefits of Graco’s low pressure (LP) airless spray tips

Discover what additional benefits you get from Graco’s low pressure airless spray tips on top of spraying at up to half of the usual pressure.

For anything from fine finish to high production applications, you should consider using Graco’s low pressure airless spray tips – marked LP – as they help increase the finish quality and reduce the cost of professional spray jobs. Look into some of their interesting benefits.
 

Graco’s low pressure tips are the most versatile airless spray tips Graco offers, as they are perfect for both fine finish jobs and high production applications. In general, they work with up to 50% less pressure compared to other tips, and that brings additional benefits:

  • Up to 50% less overspray
    Working at lower pressure produces the perfect airless finish with less overspray, giving you better control while using less material.

  • Up to twice the life
    As working at lower pressure also takes considerable tension of your sprayer, you extend the life of both the pump and the spray tip up to 2 times.

  • Perfect airless finish
    You can achieve excellent paint atomisation at a lower pressure, have better control of layer thickness and suffer less from tailing, lines and runs.

  • Easiest pattern overlap
    The improved soft spray pattern makes it easy to apply any material to any surface and provides consistent blended finish quality.

  • Reduced preparing and cleaning up
    Less overspray and better spray control simplify preparation, as you don’t need to cover up as many areas as you would otherwise. After the job, there is less stains and residue to be cleaned up.


Spot the difference
tips_hub_benefits_lp_tips_01_600x400px.jpg

Graco LP tips produce a superior finish

tips_hub_benefits_lp_tips_02_600x400px.jpg

Other tips produce tails

Endless applications for low pressure tips

You can recognise our low pressure tips by their ‘LP’ code printed on the handle. Low pressure tips work with any Graco airless sprayer and have unlimited applications:

  • Green RAC X FFLP tips are perfect for doors and trim, molding, cabinets, woodwork or any other fine finish applications.

  • Neon RAC X LP tips are perfect for interior and exterior residential and commercial jobs, as well as for every high production job.

  • Neon WRLP tips are perfect for surfaces you can spray with a wider spray pattern, to finish the job much quicker.

Choose the most productive spray tip for your job

  RAC X FF LP RAC X LP RAC X WR LP
Part Number FFLPXXX LPXXX WRLPXXXX
APPLICATIONS For fine finish applications with thin material at the lowest pressure For fine finish applications with thin material at the lowest pressure For surfaces you can spray with a wider spray pattern (60 cm), to finish the job in half the time
COMMON COATINGS Lacquers, Stains, Varnish, Enamels and Acrylics Interior/Exterior Latex, Emulsions, Oil-Based Primers, Epoxies, Elastomerics, Mastics
MAXIMUM WORKING PRESSURE 280 Bar
TIP GUARD Blue Guard (246215)
100% FACTORY TESTED

Low pressure solutions for every job

RAC X FF LP SwitchTip - FFLP312
RAC X FF LP SwitchTip
RAC X FINE FINISH LOW PRESSURE SWITCHTIPS (FFLPXXX)
Fan width (1st digit x 5) Tip sizes
5 cm 106 108 110 112    
10 cm 206 208 210 212 214  
15 cm   308 310 312 314  
20 cm   408 410 412 414  
25 cm     510 512 514 516
30 cm           616
Recommended Filter Size 200 200 200 200 100 60
RAC X LP SwitchTip - LP517
RAC X LP SwitchTip
RAC X LOW PRESSURE SWITCHTIPS (LPXXX)
Fan width (1st digit x 5) Tip sizes
10 cm     217              
15 cm 313 315 317 319            
20 cm   415 417 419 421 423 425      
25 cm   515 517 519 521 523 525 527    
30 cm     617 619 621 623 625 627 629 631
35 cm           723 725   729 731
Recommended Filter Size 100 60 60 60 60 60 60 60 60 30
RAC X WR LP SwitchTip - WRLP1223
RAC X WR LP SwitchTip
RAC X WIDE RAC LOW PRESSURE SWITCHTIPS (WRLPXXX)
Fan width (1st digit x 5) Tip sizes
60 cm 1221 1223 1225 1227 1229 1231 1233
Recommended Filter Size 60 60 60 60 60 30 30

* Water @ 138 bar — paints with a higher viscosity will decrease the flow rate. 

Genuine Graco Parts Made In the USA

 

All Graco SwitchTips are made in Sioux Falls, USA and 100% Factory Tested.

Why Demand Genuine Graco Parts?

TIME AND MONEY

Cheaper parts ultimately cost you more time and money in extra repair costs, extra labor hours, etc.

PERFORMANCE AND RELIABILITY

Only genuine Graco parts deliver the legendary Graco standard of performance and the lowest downtime.

SAFETY

One non-Graco part can lead to injury and downtime. Graco parts deliver best possible quality to deliver safest experience.

Graco