A Lubrication System for Cranes in Harsh Weather

A large crane manufacturer based in Finland serves a broad range of customers, including manufacturing and process industries, shipyards, ports and terminals. They have been using Graco’s Trabon automatic lubrication systems for over 20 years, but more recently started using them for an STS container crane.
 

Avoid pumping & metering changes

These STS container cranes are used in shipping ports and, because they are typically located on the coast, are continually subjected to harsh outdoor weather conditions in varying temperatures and wind velocities. It is important to have the correct delivery line sizes and feed pump, because grease pumping and metering capabilities can vary depending on weather and temperatures.

A local Graco distributor worked with the crane manufacture to install a Graco-Trabon LubeMaster multi-pump series progressive system, complemented with MSP and MXP divider valves in their respective master and secondary configurations. The system includes five LubeMaster pumps per crane; two are mounted at the bottom of the crane, one on each side. Two additional pumps are mounted on top of the crane with one on each side and another is mounted on the top in the control room. Each pump feeds a series of divider blocks, which feed the grease to the point of application. The system utilises MSP master and secondary divider blocks on the upper part of the crane and MXP divider master and secondary valves on the bottom part of the crane.

Up to 300 grease points per crane

There are up to 300 grease points per crane. Over 100 installations on various crane models have been completed, lubricating bearings and surfaces to keep the cranes working at all costs, despite extreme conditions.