P2 Standard
Probler P2 Gun Assembly with 00 Mix Chamber Kit
Part Number: GCP2R0
![product image](/content/dam/pim/graco/aftd/hpcf/P2-left.jpg/_jcr_content/renditions/cq5dam.web.1280.1280.jpeg)
P2 Standard
Probler P2 Gun Assembly with 00 Mix Chamber Kit
Part Number: GCP2R0
The Probler P2 Gun is lightweight and easy to manoeuvre – even in difficult spraying positions. Its double piston design provides more than 136 kg (300 pounds) of triggering force – much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to...
More InfoFeatures
Product BrochureThe Probler P2 Gun is lightweight and easy to manoeuvre – even in difficult spraying positions. Its double piston design provides more than 136 kg (300 pounds) of triggering force – much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
For high output spray polyurethane foam and polyurea applications.
- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Anti-crossover design virtually eliminates possibility of material entering the air piston
- Ergonomic handle and balanced design
Specifications & Documents
Technical Specifications
Convert to ImperialAir Inlet Size (in) | 1/4-18 |
---|---|
Air Inlet Thread Gender | Male |
Air Inlet Thread Type | NPSM |
Applicator Type | Manual |
Compatible Material | Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating |
Component A Inlet Size (in) | 1/2-20 |
Component A Inlet Thread Type | UNF |
Component B Inlet Size (in) | 7/16-18 |
Component B Inlet Thread Type | UNF |
Component Type | Plural-Component |
Fluid Orifice Size (in) | 0.029 |
For Use With | Reactor Plural Component Proportioner, Reactor Spray Foam and Coatings Equipment |
Gun Activation | Manual |
Gun Included | 1 |
Gun Series | Standard |
Gun Type | Air-Purge |
Gun Weight (lb) | 3.9 |
Gun Weight (oz) | 32.4 |
Maximum Air Inlet Pressure (MPa) | 0.76 |
Maximum Air Inlet Pressure (psi) | 110 |
Maximum Air Pressure (MPa) | 0.76 |
Maximum Air Pressure (psi) | 110 |
Maximum Flow Rate (lb/min) | 40 |
Maximum Fluid Pressure (MPa) | 24.1 |
Maximum Fluid Pressure (psi) | 3500 |
Maximum Fluid Temperature (°F) | 200 |
Maximum Fluid Working Pressure (MPa) | 24.1 |
Maximum Fluid Working Pressure (psi) | 3500 |
Minimum Air Inlet Pressure (MPa) | 0.62 |
Minimum Air Inlet Pressure (psi) | 90 |
Minimum Flow Rate (lb/min) | 3 |
Mix Chamber | 00 (.029) |
Model | P2 |
Overall Height (in) | 4.75 |
Overall Length (in) | 3.125 |
Overall Width (in) | 6.875 |
Product Type | Spray Gun |
Purge Method | Air |
Series | Standard |
Spray Gun Mix Type | Impingement |
Spray Pattern | Flat |
Trigger Lock | Locking |
Type | Spray Accessory Kit |
Wetted Parts | Stainless Steel, Carbon Steel, Chemically Resistant O-Rings, PTFE |
Air Inlet Size (cm) | 0.635 |
Air Inlet Size (in) | 1/4-18 |
Air Inlet Size (mm) | 6.35 |
Air Inlet Thread Gender | Male |
Air Inlet Thread Type | NPSM |
Applicator Type | Manual |
Compatible Material | Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating |
Component A Inlet Size (cm) | 1.27 |
Component A Inlet Size (in) | 1/2-20 |
Component A Inlet Size (mm) | 12.7 |
Component A Inlet Thread Type | UNF |
Component B Inlet Size (cm) | 1.11125 |
Component B Inlet Size (in) | 7/16-18 |
Component B Inlet Size (mm) | 11.1125 |
Component B Inlet Thread Type | UNF |
Component Type | Plural-Component |
Fluid Orifice Size (cm) | 0.074 |
Fluid Orifice Size (in) | 0.029 |
Fluid Orifice Size (mm) | 0.74 |
For Use With | Reactor Plural Component Proportioner, Reactor Spray Foam and Coatings Equipment |
Gun Activation | Manual |
Gun Included | 1 |
Gun Series | Standard |
Gun Type | Air-Purge |
Gun Weight (g) | 1770 |
Gun Weight (kg) | 1.77 |
Gun Weight (oz) | 32.4 |
Maximum Air Inlet Pressure (MPa) | 0.76 |
Maximum Air Inlet Pressure (bar) | 7.6 |
Maximum Air Inlet Pressure (kPa) | 760 |
Maximum Air Inlet Pressure (psi) | 110 |
Maximum Air Pressure (MPa) | 0.76 |
Maximum Air Pressure (bar) | 7.6 |
Maximum Air Pressure (kPa) | 760 |
Maximum Air Pressure (psi) | 110 |
Maximum Flow Rate (kg/min) | 18 |
Maximum Fluid Pressure (MPa) | 24.1 |
Maximum Fluid Pressure (bar) | 241 |
Maximum Fluid Pressure (kPa) | 24100 |
Maximum Fluid Pressure (psi) | 3500 |
Maximum Fluid Temperature (°C) | 93 |
Maximum Fluid Working Pressure (MPa) | 24.1 |
Maximum Fluid Working Pressure (bar) | 241 |
Maximum Fluid Working Pressure (psi) | 3500 |
Minimum Air Inlet Pressure (MPa) | 0.62 |
Minimum Air Inlet Pressure (bar) | 6.2 |
Minimum Air Inlet Pressure (kPa) | 620 |
Minimum Air Inlet Pressure (psi) | 90 |
Minimum Flow Rate (kg/min) | 1.4 |
Mix Chamber | 00 (.029) |
Model | P2 |
Overall Height (cm) | 12.1 |
Overall Height (mm) | 121 |
Overall Length (cm) | 7.9 |
Overall Length (mm) | 79 |
Overall Width (cm) | 17.4 |
Overall Width (mm) | 174 |
Pattern Size (mm) | 228.6 |
Product Type | Spray Gun |
Purge Method | Air |
Series | Standard |
Spray Gun Mix Type | Impingement |
Spray Pattern | Flat |
Trigger Lock | Locking |
Type | Spray Accessory Kit |
Wetted Parts | Stainless Steel, Carbon Steel, Chemically Resistant O-Rings, PTFE |