Cart
E-Flo 4-Ball
E-Flo 4-Ball Electric Circulation Pump, 230/400V 3 HP ATEX, 1500cc, Sealed, Ultralife Rod/Cylinder, Tri-Clamp
Part Number: EP31G0
Image is for illustrative purposes only.
E-Flo 4-Ball
E-Flo 4-Ball Electric Circulation Pump, 230/400V 3 HP ATEX, 1500cc, Sealed, Ultralife Rod/Cylinder, Tri-Clamp
Part Number: EP31G0
The dual lower of the E-Flo electric circulating pump minimises pressure changes at the outlet of the pump. Online maintenance simplifies repair and reduces downtime. Accomplish remote monitoring of performance via computer or PLC for a higher degree of control.
Product is Discontinued
Replacement Product Not Available
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
The dual lower of the E-Flo electric circulating pump minimises pressure changes at the outlet of the pump. Online maintenance simplifies repair and reduces downtime. Accomplish remote monitoring of performance via computer or PLC for a higher degree of control.
- Sealed lower has longer maintenance cycles, plus it can be used for every pumping application in your mix room, including catalysed coatings
- 3 times more efficient than pneumatics
- Process control and feedback
- Slow smooth change overs
- Low noise
- Open wet cup version is also available
Specifications & Documents
Technical Specifications
Convert to Imperial| Application | Circulation |
|---|---|
| Compatible Material | Solvent-borne, High Solids, Xirallic, Metallics, Varnish, CARC |
| Fluid Inlet Size (in) | 2 |
| Fluid Outlet Size (in) | 2 |
| Fluid Section Type | Sealed |
| Input Voltage (V AC) | 230/400 |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (cpm) | 20 |
| Maximum Flow Rate (gpm) | 8.1 |
| Maximum Input Amperage (A) | 20/15 |
| Maximum Operating Temperature (°F) | 104 |
| Maximum Speed (RPM) | 1800 |
| Maximum Working Pressure (MPa) | 2.9 |
| Maximum Working Pressure (psi) | 425 |
| Minimum Operating Temperature (°F) | 32 |
| Model | E-Flo |
| Motor Type | AC |
| Portable | Non-Portable |
| Power Rating (HP) | 3 |
| Series | 4-Ball |
| Type | Electric Piston Pump |
| Wetted Material | Stainless Steel |
| Application | Circulation |
| Compatible Material | Solvent-borne, High Solids, Xirallic, Metallics, Varnish, CARC |
| Fluid Inlet Size (in) | 2 |
| Fluid Inlet Size (mm) | 50.8 |
| Fluid Outlet Size (in) | 2 |
| Fluid Outlet Size (mm) | 50.8 |
| Fluid Section Type | Sealed |
| Input Voltage (V AC) | 230/400 |
| Material | Stainless Steel |
| Maximum Continuous Cycle Rate (cpm) | 20 |
| Maximum Flow Rate (l/min) | 30.66 |
| Maximum Input Amperage (A) | 20/15 |
| Maximum Operating Temperature (°C) | 40 |
| Maximum Speed (RPM) | 1800 |
| Maximum Working Pressure (MPa) | 2.9 |
| Maximum Working Pressure (bar) | 29 |
| Maximum Working Pressure (kPa) | 2900 |
| Maximum Working Pressure (psi) | 425 |
| Minimum Operating Temperature (°C) | 0 |
| Model | E-Flo |
| Motor Type | AC |
| Portable | Non-Portable |
| Series | 4-Ball |
| Type | Electric Piston Pump |
| Wetted Material | Stainless Steel |
Product Manuals
311601C, 15H877 TDC Sensor Replacement Kit for E-Flo 4-Ball Piston Pump, English
(412 KB)
(English Only)
311604D, Instruction Manual for Crank Arm Rebuild Kit for E-Flo 4-Ball Piston Pump, English
(481 KB)
(English Only)
311605J - Motor Mounting Kits for E-Flo 4-Ball Piston Pumps, Instructions, English
(390 KB)
(English Only)
311616D, Slider Bearing Kit for E-Flo 4-Ball Piston Pump Instructions Manual, English
(481 KB)
(English Only)
Repair Parts
| Part No. | Description |
|---|---|
| 289552 | KIT, MOTOR, ELEC, 3HP, ATEX |
| 15H871 | KIT, REDUCER SEAL REBUILD |
| 15H882 | KIT, SLIDER BEARING |
| 15H877 | KIT, TDC |
| 15H886 | KIT,GEAR REDUCER REPLACEMENT |
| 15J639 | FITTING, REDUCER, SAN, 2" X1-1/2" |
| 255216 | KIT, REPLACEMENT, WRIST PIN |
| 15J422 | FITTING, 1-1/2" SAN, 1-1/2" NPT |
| 15H883 | KIT, CRANK ARM |
| 247341 | KIT, COLLECTOR, CYLINDER SLIDER |
| 16C487 | KIT,MOTOR COUPLER,184TC FRAME |
| 15H874 | KIT, SLIDER CYLINDER REBUILD |
| 15H880 | KIT, MOTOR COUPLER, 184TC FRAME |
| 15K012 | KIT ,PNEUMATIC,VFD/BPR CONTROL |
| 24J305 | SENSOR, CIRCUIT, OPTION |
| 15H878 | KIT, MANIFOLD, IN/OUTLET GASKET |
| 15J926 | KIT, OUTPUT SHAFT SEAL TOOL |
| 24E453 | KIT,MOTOR ADAPTER |
| 24H372 | MODULE, ACS CONVERTER |
Recommended Accessories
