Cart
RAC X FF LP SwitchTip
Fine Finish Low Pressure RAC X FF LP SwitchTip, 514
Part Number: FFLP514
Available for purchase in: Australia & New Zealand, India, Japan, Korea, Mainland China, China Hong Kong SAR, China Taiwan, Southeast Asia
RAC X FF LP SwitchTip
Fine Finish Low Pressure RAC X FF LP SwitchTip, 514
Part Number: FFLP514
Available for purchase in: Australia & New Zealand, India, Japan, Korea, Mainland China, China Hong Kong SAR, China Taiwan, Southeast Asia
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 514 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 5-10 cm (10 to 12 inch) fan pattern and a 0.014 inch orifice. Reverse the SwitchTip to easily clear clogs.
Questions About this Product?
If you’re not finding the information you need, ask one of our experts.
Ask an ExpertFeatures
Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 514 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 5-10 cm (10 to 12 inch) fan pattern and a 0.014 inch orifice. Reverse the SwitchTip to easily clear clogs.
For fine finish applications
- Less Prep & Cleanup Time
- Less mess with less overspray
- Put the paint where you want it
- Easiest Pattern Overlap
- Softer spray fan pattern
- Easy to apply any material to any surface
- Consistent blended finish quality
- Extended Life
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- SmartTip Technology
- Exclusive internal tip geometry
- Reduces energy required to atomise paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Best Tip on the Market
- Works with any airless sprayer
- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Easy to Identify Tip Size
- Large raised tip size numbers are always legible – even when covered with paint
- Superior Tip Design
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
Specifications & Documents
Technical Specifications
Convert to Imperial| Compatible Material | Primer, Stains, Varnish, Water-Based Paint, Enamel, Latex, Solvent-borne Paints |
|---|---|
| Fluid Orifice Size (in) | 0.014 |
| For Use With | RAC X HandTite Tip Guard |
| Material | Tungsten Carbide |
| Maximum Fan Width (in) | 10 |
| Maximum Flow Rate (gpm) | 0.21 |
| Maximum Working Pressure (psi) | 4050 |
| Minimum Fan Width (in) | 10 |
| Model | RAC X |
| Series | FF LP SwitchTip |
| Spray Pattern | Fan |
| Tip Type | Airless |
| Type | Spray Tip |
| Compatible Material | Primer, Stains, Varnish, Water-Based Paint, Enamel, Latex, Solvent-borne Paints |
| Fluid Orifice Size (in) | 0.014 |
| For Use With | RAC X HandTite Tip Guard |
| Material | Tungsten Carbide |
| Maximum Fan Width (cm) | 25 |
| Maximum Fan Width (in) | 10 |
| Maximum Fan Width (mm) | 305 |
| Maximum Flow Rate (l/min) | 0.79 |
| Maximum Working Pressure (bar) | 280 |
| Maximum Working Pressure (kPa) | 28000 |
| Maximum Working Pressure (psi) | 4050 |
| Minimum Fan Width (mm) | 254 |
| Model | RAC X |
| Pattern Size (mm) | 254 to 304.8 |
| Series | FF LP SwitchTip |
| Spray Pattern | Fan |
| Tip Type | Airless |
| Type | Spray Tip |
