Cart
Reactor A-XP1
Reactor A-XP1 Proportioner Package, Fusion AP Gun, Wheels, DataTrak, 230/400 V
Part Number: APY165
Reactor A-XP1
Reactor A-XP1 Proportioner Package, Fusion AP Gun, Wheels, DataTrak, 230/400 V
Part Number: APY165
The Reactor A-XP1 is a Graco-engineered coatings proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates – resulting in better quality coating.
Product is Discontinued
Replacement Product Not Available
Features
Product Brochure
The Reactor A-XP1 is a Graco-engineered coatings proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates – resulting in better quality coating.
For polyurea coatings – applies up to 5.7 l (1.5 gal) per minute.
- Maintains temperature set points for better yield
- Maintains consistent output pressure for uniform spray pattern
- Easy to operate and maintain
- Best choice for affordability and durability
Three Heat Zones
- Three independent heat zones – ISO, resin and hose heat
- Provide accurate heat control for reliable spraying to handle different chemical viscosities
- Digital temperature controls
Three Heat Zones
- Three independent heat zones – ISO, resin and hose heat
- Provide accurate heat control for reliable spraying to handle different chemical viscosities
- Digital temperature controls
Recirculation Manifold
- A quick, easy way to balance system pressures
NXT Air Motor
- Low air consumption for increased efficiency
- Muffler provides low operating noise levels
- Air valve provides smooth and rapid changeover
ISO Pump Lube System
- Prevents iso-cyanate crystallisation on the pump seal and shaft
Hybrid Heater
- Provides better temperature control
Specifications & Documents
Technical Specifications
Convert to Imperial| Air Inlet Size (in) | 1/2 |
|---|---|
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Protective Coatings |
| Applicator Type | Manual |
| Compatible Material | Plural Components |
| Component A Inlet Size (in) | 3/4 |
| Component A Thread Gender | Female |
| Component A Thread Type | NPT |
| Component B Inlet Size (in) | 3/4 |
| Component B Thread Gender | Female |
| Component B Thread Type | NPT |
| Component Type | Two Component |
| Flush Type | Solvent |
| Frequency (Hz) | 50/60 |
| Gun Type | Fusion AP |
| Hose Length (ft) | 50, 10 |
| Includes | Proportioner, Fusion AP Gun, Heated Hose, Wheels, DataTrak |
| Material Application | Polyurea |
| Maximum Air Consumption (SCFM) | 32 scfm at 2000 psi |
| Maximum Air Inlet Pressure (psi) | 125 |
| Maximum Flow Rate (gpm) | 1.5 |
| Maximum Flow Rate (lb/min) | 25 |
| Maximum Fluid Temperature (°F) | 190 |
| Maximum Fluid Viscosity (cP) | 1500 |
| Maximum Mix Ratio | 1:1 |
| Minimum Fluid Viscosity (cP) | 250 |
| Model | Reactor |
| Overall Depth (in) | 30 |
| Overall Height (in) | 43.5 |
| Overall Width (in) | 29 |
| Phase | 1, 3 |
| Power Rating (HP) | 17.43 |
| Power Rating (W) | 13000 |
| Power Rating (kW) | 13 |
| Power Source | Air |
| Pressure Type | High Pressure |
| Product Type | Plural Component |
| Series | A-XP1 |
| Sound Power Level (dB(A)) | 80.1 |
| Sound Pressure Level (dB(A)) | 70.2 |
| System Includes | DataTrak and Wheels |
| Type | Proportioning Package |
| Voltage (V) | 230, 400 |
| Weight (lb) | 310 |
| Wetted Material | Carbon Steel, Stainless Steel, Chrome, Aluminium, Fluoroelastomer, PTFE, Nylon |
| Air Inlet Size (cm) | 1.27 |
| Air Inlet Size (in) | 1/2 |
| Air Inlet Size (mm) | 12.7 |
| Air Inlet Thread Gender | Female |
| Air Inlet Thread Type | NPT |
| Application | Protective Coatings |
| Applicator Type | Manual |
| Compatible Material | Plural Components |
| Component A Inlet Size (in) | 3/4 |
| Component A Inlet Size (mm) | 19.05 |
| Component A Thread Gender | Female |
| Component A Thread Type | NPT |
| Component B Inlet Size (in) | 3/4 |
| Component B Inlet Size (mm) | 19.05 |
| Component B Thread Gender | Female |
| Component B Thread Type | NPT |
| Component Type | Two Component |
| Flush Type | Solvent |
| Frequency (Hz) | 50/60 |
| Gun Type | Fusion AP |
| Hose Length (m) | 15, 3 |
| Includes | Proportioner, Fusion AP Gun, Heated Hose, Wheels, DataTrak |
| Material Application | Polyurea |
| Maximum Air Inlet Pressure (bar) | 8.62 |
| Maximum Air Inlet Pressure (kPa) | 862 |
| Maximum Air Inlet Pressure (psi) | 125 |
| Maximum Flow Rate (cc/min) | 5680 |
| Maximum Flow Rate (kg/min) | 11.4 |
| Maximum Flow Rate (l/min) | 5.68 |
| Maximum Fluid Temperature (°C) | 88 |
| Maximum Fluid Viscosity (cP) | 1500 |
| Maximum Mix Ratio | 1:1 |
| Minimum Fluid Viscosity (cP) | 250 |
| Model | Reactor |
| Overall Depth (cm) | 76.2 |
| Overall Depth (mm) | 762 |
| Overall Height (cm) | 110.5 |
| Overall Height (mm) | 1105 |
| Overall Width (cm) | 73.7 |
| Overall Width (mm) | 737 |
| Phase | 1, 3 |
| Power Rating (W) | 13000 |
| Power Rating (kW) | 13 |
| Power Source | Air |
| Pressure Type | High Pressure |
| Product Type | Plural Component |
| Series | A-XP1 |
| Sound Power Level (dB(A)) | 80.1 |
| Sound Pressure Level (dB(A)) | 70.2 |
| System Includes | DataTrak and Wheels |
| Type | Proportioning Package |
| Voltage (V) | 230, 400 |
| Weight (kg) | 140.6 |
| Wetted Material | Carbon Steel, Stainless Steel, Chrome, Aluminium, Fluoroelastomer, PTFE, Nylon |
Product Manuals
Sales Literature
Certifications
Repair Parts
| Part No. | Description |
|---|---|
| 255023 | KIT, FUSE, 5 AMP, 5 X 20MM |
| 193031 | NUT, RETAINING |
| M12LP0 | KIT, MOTOR, AIR, 6.0 IN, PARK, A25 |
| 246100 | Round Fusion Air-Purge Gun with 00 Mix Chamber and 0.74 mm (0.029) in Orifice Size |
| 246679 | 15 m (50 ft) High Pressure Heated Hose with Thermocouple Scuff Guard and 9.5 mm (3/8 in) Inside Diameter |
