Meet the new Electric King
The King has been the industry's favourite for over 60 years. The new King electric airless sprayer combines benefit of a traditional pneumatic airless sprayer (e.g. the robust ATEX design, simple maintenance and power) with those of an electric unit (e.g. energy cost savings, eliminating icing problems and noise reduction).
The King electric airless sprayer operates on a reliable and convenient electric power source. This reduces jobsite inefficiencies that are usually associated with air compressors. Electrical technology also reduces pulsation, prevents motor icing, and much more. This ensures your coating jobs will run smoothly, every single time.
REBUILD LIKE A PRO
 | Electric power
|
 | Cost savings
|
 | ATEX approved
|
 | User comfort
|
*Study completed on pump pressure of 241 bar (3500 psi) for 20 hours/week; spraying 1226 L (324 gal) of 73% volume solids epoxy with XHD519 tip
“It doesn’t fluctuate like air pumps do. It’s much more consistent and always has a good pattern regardless of which tip you use.”
Dean stewart, iron works
Pressure Control Knob
• Minimal training required
New Driver
• Updated driver for maximum safety while spraying in hazardous locations
• Minimal service driver requires only oil. More up time, less hassle, reduced maintenance costs
Built-in Disconnect Switch
• Designed for use in explosive
• atmospheres
Electrically Operated
• No compressor maintenance costs
• Runs on 240 VOLT/15 AMP or 110 VOLT/25 AMP power
• Low cost of ownership
• Energy efficient
Pinch protection and dust cover for increased safety
Burst Disk
• Prevents over pressure of spray line
Xtreme® Lower
• 115cc - KING E 60
• 145cc - KING E 50
Pinch protection and dust cover for increased safety
Check Valve
• Helps maintain consistent fluid pressure
Inlet Housing and Suction Set
• Reduced material and solvent requirements when priming/flushing
Learn more about the electric technology
Choose the model that's right for you
| E60 King Electric Sprayer | E50 King Electric Sprayer | |
| Maximum Working Pressure | 414 Bar (6000 psi, 41.4 MPa) | 310 Bar (4500 psi, 31.0 MPa) |
| Supported Tip Size* | 0.53 mm (.021 in) @ 345 bar (5000 psi, 34.5 MPa) Spray Pressure | 0.58 mm (.023 in) @ 276 bar (4000 psi, 27.6 MPa) Spray Pressure |
| Overall Dimensions (W x H x D) | 70 x 127 x 74 (27.5 x 50.0 x 29.0 in) | 70 x 127 x 74 (27.5 x 50.0 x 29.0 in) |
| Operating Temperature Range | 5°C to 50°C (23°F to 120°F) | 5°C to 50°C (23°F to 120°F) |
| Power Input | 15A @ 200-240V, 50/60 Hz, single phase; 25A @ 100-120V, 50/60 Hz, single phase | 15A @ 200-240V, 50/60 Hz, single phase; 25A @ 100-120V, 50/60 Hz, single phase |
| Sound Pressure | 70 dB (A) | 70 dB (A) |
*Actual supported tip size may be larger or smaller depending on: actual input voltage, hose length, paint type, paint thinning, and paint temperature.